digital ultrasonic thickness gauge is capable of reading wall thickness thru coating and paint without affecting the measurement

Ultrasonic Thickness Gauge w/ Thru Coating Capabilities

Model UTG-2600

State of the art, digital ultrasonic thickness gauge is capable of reading wall thickness thru coatings and paint without affecting the measurement and is packed with the most popular features including basic measurement, Scanning Capabilities, Adjustable Sound Velocity, and extended memory capabilities. This dynamic ultrasonic thickness gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2600 ultrasonic thickness gauge will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

Specifications:

Display type                       4-digit LCD w/Back Light

Minimum display unit           0.003 (if>3.93" 0.0003" (if<3.93")

Measuring Range               Standard Mode 0.040" to 12" in steel

Thru Coating Mode: 0.118" - .905" (3.0 -23mm)w/standard probe

Accuracy                           +/- 1%xH + 0.0007" (H=displayed value)

Sound velocity range         3280-32805 ft/s (1000-9999m/s)

Upper/Lower Limit Preset Alarm         Yes

Operating temperature             32-122 degrees F

Frequency                             4MHz

Update range     4Hz

Memory             500 Test Values

Mini-Printer   Optional

Power supply           3v AA alkaline batteries (2pc)

Battery life               Approx. 100 hours (w/backlight off)

Power consumption   Working current is less than 3V

Dimensions       5.86" x 2.87" x 1.25" (149 x 73 x 32mm)

Weight               5.6oz (160g)

Ultrasonic Thickness Gauge w/ Thru Coating Capabilities UTG-2600