Ads by Google
All ET door openers have CE approval (LVD, EMC, RTTE).
Functions:
1).Multi opening ways
2).Electronic limit switchs
3).Automatic safety reverse
4).3 minutes LED light delay
5).Manual release in case of power failure
6).Chain drive,low noise
7).Soft start,soft stop
8).Remote control
9).Infrared sensor
10).Flash light
11).Backup battery function
12).Wall switch
Specifications:
INPUT VOLTAGE: | 220/230V AC 50Hz | |
(110v AC 60Hz or 127V AC 60Hz available on request) | ||
Single Phase | ||
Current Required | 1Amp | |
TRANSFORMER SPEC: | Primary Voltage | 220/230V AC |
WORKING CIRCUMSTANCE: | TEMPERATURE: | -20~55 |
RELATIVE HUMIDITY: | <90% | |
MOTOR SPEC: | Motor Type | Permanent Magnet D.C. Motor |
Voltage | 24V DC | |
Torque | 150 kg.cm at 4 Amps | |
CONTROL BOARD SPEC: | Relay Contact Rating | 30 Amp / 30V DC |
Relay Coil Voltage | 24V DC | |
Control Board Voltage | 24V DC / 5V DC | |
Light Glove Voltage | 220v ac 15 watts Max | |
Receiver specification | Receiver type FSK AM | |
(built-in) RF Frequency | 433.92MHz | |
Code Storage Capacity 20Different codes | ||
Control distance 50m max. | ||
TRANSMITTER SPEC: | Carrier Frequency | 433.92MHz |
Current Consumption | 50mA(approx) | |
Battery Voltage | 12 Volts A23 battery | |
Coding Format | Rolling Code(7.38*1019 Combinations) | |
WEIGHT: | 14.00KGS(motor+rail) | |
MODEL: | ET-600 ET-800 ET-1000 |
Test Equipments:
Other Styles Of Door Openers:
CE Certificates:
overhead garage door opener/motor/operator,sectional garage door opener