Packaging Detail: | 1>pack in white EPE pattern box 2>color box 3>carton |
Delivery Detail | in 30 days after receipt payment in advance |
1>Car Fuel Pump 2>Rated Current: 8.5A 3>Rated Voltage: DC 12V 4>Flow Rate: 50L/min 5>Fuel Controller
Model Name: 12V Car Fuel Pump
Specification:
1.Technology and Function:
Model No. | Rated Voltage (V) | Rated Current (A) | Flow rate (L/Min) | Suction Head (M) | Total Head (M) |
SL-006 | 12 | 8.5 | 50 | 3 | 5.5 |
Diameter of Outlets: 25mm
2.Mulfunction Diagnosis and Elimination:
Mulfunction | Reason | Elimination |
first operate no stream in outlet pipe | 1.error connect (+) (-)electrode | Right connect (+)(-)electrode |
2.leakage between pipe and suction port | Adjust inlet pipe and screw fasten ring firmly | |
3.didn’t add some diesel into motor house before operate | Add some diesel in pump house | |
Small stream in outlet pipe | 1.low connect voltage | Rise voltage to rated voltage, caution not to over rated |
2.over suction Head and Total Head | Ajudge Suction Head and Total Head | |
3. suction side filter jammed | 3. eliminate dirts on filter |
Operation Manual:
Add some diesel in pump house before start Motor to ensure Maximum suction when first operate.
1> The self-priming pump only for pumping Diesel, do not pump low ignition oil like Gasoline and high viscous oil like Engine Oil
2> caution connected Voltage suit with pump’s Rated Voltage. Voltage Tolerance not exceed ±12%
3>Direct Current electrode divided into Anode (+) and Negative (-), Red wire is Anode. Don’t connect electrode wrong or pump Motor reversed and no diesel output.
4>do connect pipe to suction port and output port completely as arrow indicate and ensure no leakage to guarantee efficient Suction Head.
5>Install Filter in the end of Suction pipe to avoid solid and dust into motor house and damage rotor and impeller. Frequently eliminate dust on the surface of Filter iron net. Don’t coat denser net on Filter to avoide filter jammed to cause suction flow reduction and damage pump rotor. Filter Diesel denser by install a denser Filter in the end of outlet pipe.
6>Pump continually workable. Don’t idle more than 5 minutes or rotor and diaphragm friction heat too high and damage
7>Maintain pump by mechanical experts afte operating 500 hours
Fuel pump