Ads by Google
Auto Diesel Fuel Filter Water Separator 900FH Filter Separator (TNS-A009)
Description:Turbine Series Fuel Filter/Water Seprator
Flow Rate: 90GPH / 341LPHDimensions: Height 17", Width 6", Depth 7"Port /Connection Size: 7/8”-14UNF
Filter Rating: 30 MicronFitting Type: #10 O-Ring Boss / 7/8" O-Ring Boss Fittings Required: 2Replacement Element: Any Racor Type 2040 equivalentService Clearance for Element Replacement: 5"
All TANOSEN Turbine Fuel Filter / Water Separators are tested at its facility in our factory prior to shipment.
Each unit undergoes a thorough examination and testing process that includespressure test, torque checks, and flow circuit testing to ensure your TONASEN filters works as you expect right out of the box.
Need a different micron size? TANOSEN filters come preloaded with a 30 micron element. If you need a different micron size, just let us know.
If you have any questions about Diesel Filters Direct or any of the TANOSEN Filtration Products that we sell, please EMAIL me or you can call us at: +86-57765909007. We look forward to hearing from you
- Compare to Racor 900 Series 900FG / 900FH - Flow Rate: 90GPH / 341LPH
Item | Part No. | Description |
1 | RK11888 | T-handle, thread is 9/16”-18 SAE |
11350 | T-handle O-ring | |
11003 | T-handle Gasket, Nylon (FE/FF) | |
2 | RK11005B | Standard Lid |
11007 | Square-cut Gasket (Lid & Bowl ring) | |
RK11005/A | Lid, T-handle and O-ring Kit | |
RK11005B-02 | Lid w/ Vent Port and Plug Kit (not shown) | |
3 | RK19002 | Outer Cylinder |
4 | 2040SM-OR | 2 Micron Element w/ Seals |
2040TM-OR | 10 Micron Element w/ Seals | |
2040PM-OR | 30 Micron Element w/ Seals | |
5 | RK11815-101 | Body Clamp Bracket |
6 | RK11-1767-01 | Heater, 12 vdc, 300 watt (for use w/ body feed-thru) |
RK11-1800-01 (1) | Heater, 12 vdc, 300 watt w/ body feed-thru | |
RK11-1767-02 | Heater, 24 vdc, 300 watt (for use w/ body feed-thru) | |
RK11-1800-02 (1) | Heater, 24 vdc, 300 watt w/ body feed-thru | |
7 | 11007 | Square-cut Gasket (Lid & Bowl ring) |
11036 | Bowl O-ring (FE only-not shown) | |
8 | RK21067 | Body Feed-thru Assy. (for bodies w/ feed-thru port) (wire guage=14 AWG) |
RK11-1679 | Body Feed-thru Port Plug (plastic) | |
9 | RK11026D | Turbine Centrifuge/Conical Baffle |
10 | RK21069 (2) | Water Probe (for Bowls w/ 1/2”-20 port) |
RK20126 | Water Probe Port Plug (plastic) | |
11 | RK30488 | Self-venting Drain (FF/FG/FGSS, See Figure 2) |
RK11746 | Seal Service Kit for Drain #11780 (See Figure 2) | |
12 | 11040 | Bowl Drain Fitting (FE/FF, See Figure 2) |
RK11341 | Bowl Drain Gasket Kit (11041 & 11340, not shown) | |
13 | RK11-1606 | See-thru Bowl w/ Water Probe Port & Plug |
RK11734 | Metal Bowl w/ 1/4”NPT Drain & Plug (FGM) | |
RK11734-01 | Same as above but w/ Water Probe Port & Plug | |
14 | RK11028B | Check Ball and Seal |
15 | RK11542 | Hex/Washer Head Capscrew, 1/4”-20 x 1”(4) |
16 | RK11037A | Bowl Ring, 5” diameter (FF/FG) |
17 | RK11-1678 | Body, 7/8”-14 SAE w/ Heater Feed-thru Port |
RK11-1776-01 | Body,(Same as above but includes return tube) | |
RK11-1776-02 | Body, Metric 22mm x 1.5 w/ Heater Port | |
18 | RK19474 | Return Tube w/ straight (body-end) threads |
RK19001 | Return Tube w/ tapered pipe (body-end) threads | |
19 | RK11-1404 | Assembly Seal Service Kit (all models-not shown) |
19472 | Installation Instructions, 900/1000 Series | |
(1) Filter body must have port next to fuel Inlet for heater feed-thru installation. In-filter heater may require a Heater Relay Kit. Power requirements are (maximum) :12vdc=25amps, 24vdc=12.5amps.(2) Water probe must be used with a Water Detection Kit.SeeAccessoriesSection. | ||
Auto Diesel Fuel Filter Water Separator 900FH Filter Separator (TNS-A009)