KVCF Differential Flow Transducer Suitable to dirty fluids Low requirement for straight pipe

KVCF Differential Flow Transducer can be used to measure flow of fluid, such as two-phase medium (moisture, condensate, etc), dirty medium (coke-oven gas, GFG, natural gas, raw oil, etc) and so on.

Technical Features:

Low installation requirement: 0~3D for upstream and 0~1D for downstreamTurndown ratio: 10:1Low pressure loss: pressure loss is just 1/3 ~1/5 of that of orifice plate for same βAbrasion resistance: vacuum will be produced after streamlined cone restriction, avoiding cone from wearing outNo block, no adherence: due to the contour of the V-cone not allow for area of stagnation where debris, consensation or particles from the fluid could accumulateExcellent repeatability:  the V-cone primary element exhibits excellent repeatability of + 0.1%Long term stability: β ratio with no change for long term provide high accuracy for long timeSignal stability: signal fluctuation is 1/10 of that of orifice plateHigh accuracy: + 0.5%

Technical Specifications:

Accuracy: ±0.5%Repeatability: ±0.1%Rated Pressure: ≤16MPa, Maximum ≤42MPaOperating Temperature: -40 ~ 700oCAmbient: -40 ~ 65oCInstallation Requirement: 0 ~ 3D for upstream, 0~1D for downstreamTurndown Ratio: 10:1Medium: Gas / Liquid / SteamStructure type: Pipe Flanged / Directly welded / Square PipeMaterial: Kinds of metalFlange Standard: As required

KVCF Differential Flow Transducer