Ads by Google
steel deck forming machine
1.Technical Parameters
NO | Item | Para | Memo | |
1 | Suitable material | Type | galvanized steel, colored steel | |
Thickness (mm) | 0.75-1.25 | |||
Yield Strength (Mpa) | 230 | |||
Width (mm) | 1220 | |||
2 | Forming Speed (m/min) | About 15 | Not including cutting time | |
3 | Roller quantity | About 30 stands | Depend on actual design | |
4 | Forming main motor power(KW) | 5.5kw*3 | Depend on actual design | |
5 | Main hydraulic station power(KW) | 5.5 | Depend on actual design | |
6 | Decoiler motor power (KW) | 5.5 | Depend on actual design | |
7 | Decoiler hydraulic station power (KW) | 3 | Depend on actual design | |
8 | Total power | 30.5 | Depend on actual design | |
9 | Power | AC440V,60Hz,3 Phase | ||
10 | Dimension (L×W×H, m) | 27×3×2 | Depend on actual design | |
2.Components
Name | Model/Name | Quantity | Technical Description |
1.Decoiler system | 6T automatic decoiler (JK6-1250AM) | 1set | Arm type, hydraulic expand, electrical motor decoil, supersonic control, with coil car. |
2. Main forming system | Feeding guide device | 1set | 1. Roller material:38CrMoAl with surface nitrified 2. Roller shaft material: 45# steel after quenching and tempering treatment 3. Roller inner supporting structure type: column 4. Motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear 5. Cutting blade material Cr12 quenched treatment |
Roll forming system | 1set | ||
Post-cutting device | 1set | ||
3. Output system | Stacking system | 1set | 1,Stacker length is 6m. 2,This system' s air source has to be prepared by customer, air pressure be higher than 0.5MPa; air flow be more than 0.5 cubic meter per minute; and air source shall be dry and clean. |
4. Hydraulic system | 1set | Main machine using outside-placed hydraulic station. Decoiler using inside-placed hydraulic station. | |
5. Electric control system | 1set | 1. PLC Control, encoder automatic cutting in length 2. Operation mode: Touch screen+ button 3. adjusting the speed by AC frequency conversion | |
3.Working process
Decoiling →Guided feeding→Roll forming→Cutting to length →finished panel stacking
4.parts of the machine
5.profile drawing
6.layout drawing
7.Sales service
1)We can arrange our technician to go abroad,but all the relevant cost should in buyers side.
2)We provide technical support for whole life of our machines.
8.Feature of our machine
1)Controlling by computer,PLC display,operation is easy,running is steady and reliable, endurable, maintenance-free.
2)We can design it as per customers' requirements in terms of specification and configuration.