YK-12   Remote Control Fireworks Launcher

Instruction for use

A .       Power :

It introduces inner power supply: eight pieces 1.5V 5# battery; Working voltage: 12V. 6F22 Working voltage: 9V battery the emitter.

B . Test:

All switches after the confirmation under the off-position, meet an electronic flame; "Power" The switch dials approaches "On" the position, "Power" the red power light is bright; If 1 - 12# has all met an electronic flame, 1 -12# "Test Indication" the green examination indicating lamp is bright, in case some number is not bright, please inspect if a corresponding number electronic flame whether contacts good.

C . Ignition:

In detection mode, the receiver antenna is installed, and the vertical upward; the "Safety Switch" safety switches allocated to the "On" position, "Ignition" ignition indicator light; the transmitter antenna and the vertical length of the longest out up to transmitter dial to the right side of power switch "ON" position, by firing on the transmitter button ignition, the transmitter number 1 # 1 # -12 # -12 # and receiver numbers.

D . Matters needing attention:When (1) uses, the receiver and the launcher antenna should be vertical upwardly.

(2) This equipment remote control is from regular radio factory ordering, in sets at 8 numerical ciphers, leaves the plant according to the order, the not same password, its password does not have to change at will.

(3) this remote control effective range when the open field is500 meters, the test, if could not achieve the effective range, please replace in the launcher 6F22 in the 9V battery or the receiver 5# 1.5Vbattery.

(4) pays attention to the fire protection, the waterproofing, is moisture-proof, quakeproof.

Fireworks firing sytem 12 groups YK-12 consolas para eventos