high-efficient water mist/foam fire-extinguishing apparatus

This is the High-Pressure Water Mist/Foam Fire Extinguishing Apparatus

The size of this apparatus is 1250mm*1100mm*800mm

the main technical parameters of this high-pressure water mist/foam fire-extinguishing unit list as below:

engine:389cc,single cylinder,4-stroke,overhead valve, petroloil tank capacity:6.0Loil consumption:3L/hoperating pressure of the water pump:13MPapump flow:40L/minspraying high-pressure hose:reel 50±2Minlet pipe of the water tank:30Mwater tank capacity:400Lfoam tank capacity:50Lspraying lift   water column direct spraying:16-18M

                             water mist spraying:10-12M

                             air foam direct spraying:12-13M

continuous squirt time :10 min

The functions of the product list as below:

cooling:The water mist grain diameter is <200μm.The smaller the grain diameter the bigger the covering area,with the role of high-efficiency heat absorption.It can be completely evaporated and cooled in the scene of a fire.Extinguishing by Smothering:It can quickly evaporate and swell the vapor with the volume of about 1700 times into the steam and quickly dilute oxygen and combustible gas around the fire source to form the smothering state and extinguish the fire.Reduction of Radiant Heat:The water mist molecules absorb the heat energy around the fire source and the water mist is completely evaporated and become the steam,which quickly shrounds blazers,flame and smog and has the splendid capability of blocking radiant heat and thick smoke of flame.High-Pressure Water Fog:The pump,with the operating pressure,can provide the adequate water fog kinetic energy directly reaching the surface of the blazer.The high-density water mist sprayer can absorb soot,improve the visibility of the scene of a fire ,eliminate the poisonous gas,quickly extinguish the fire and assure the firefighter's safety.Saving of Energy and Amount of Water:The water mist needs a small amount of water,which will not cause the second damage after the fire due to too much water used and save water.Water and Foam Fire Extinguishing Agent: Water and foam fire extinguishing agent are mixed and used ,which can achieve the best effect on oils.

high-efficient water mist/foam fire extinguisher