The Dual Action Manual Push Button provides a manually initiated discharge facility that is accomplished by pushing two buttons

1).Description:

The Dual Action Manual Push Button provides a manually initiated discharge facility that is accomplished by pushing two buttons simultaneously. The protective clear glass front cover must first be broken before

access to these Buttons is possible 

 

2).Features:

 Memory state  discharge indicator  will be activated once the units have been discharged and

            will stay oneven after resetting power to the control panel

   2      Isolates both positive and negative terminals of the discharge line when in stand-by mode 

   3     100% redundancy built into the unit.

   4       Ready status LED

   5       Requires pushing of 2 buttons simultaneously to activate the discharge sequence

 

 

3).Construction:

The device consists of a casing and a front cover mounted with a breakable glass. The body and cover are made of mild steel with epoxy powder coated signal red. Cables are connected via the opening from the side of the casing. The box is mounted to the wall by using two screws through two holes at the back of the casing. The device is normally mounted below a fire control panel.  

4).Operation:

Break glass and push both buttons   simultaneously.

 

5).Dimension:

The overall dimension is 100mm (H) x 130mm (W) x 80mm (D).

Dual Action Manual Push Button