NONWOVEN FILTER CLOTH: PTFE/P84/FMS/Nomex/PPS/GLASS FIBER PP/PET/ACRYLIC/PA ECT.

Fiber glass needle punched felt is a reasonable new type of filter media used for fiber bags in high temperature circumstance, which with the properties of three dimensional cellular structure, with a high hold rate, low air resistance, the filter efficiency will superior than woven filter fabrics can up to 99.9%, with a high filter velocity will the two times when compare with other normal woven filter fabrics, this fabrics widely used in carbon plant, chemical plant, metallurgical plant, coal fired boiler, etc. Fiber glass needle felt applicable to the pulse jet bag filter system, high temperature and corrosion resistance, with good performance for manage the industrial dust pollution, and recycle the valuable particles.Fiber glass blend with other high temperature resistance fiber needle felt, we called FMS. FMS is a good high temperature resistance filter fabrics, this fabrics mainly made by 5.5 micron diameter glass fiber blend with P84 (polyimide), aramid(Nomex), PPS (ryton) fiber, with the three dimensional cellular structure, low air resistance, especial blend with P84 which with leaf style fiber, can increase the filter surface (80%), so easy to collect the dust, increase the fiber cohesion, can accept the high wind speed (50% higher about 1~1.4m/min), and also with the properties of abrasion resistance. This kind of fabrics widely used in metallurgical plant, chemical plant, coal fired boiler, incinerator, cement plant for dust collector or smoke filtration in high temperature circumstance.

Note: 1. special specification can be customized.2. maximum width:2.3meters.3. both filter cloth rolls and filter bags are available from HNFILTER.

Hnfilter-FG-800	Fiber material		Fiber glass			Finishing
Fiber glass filter felt	Scrim material		Fiber glass scrim			Heat set
	Weight			GSM	800	Calendar
High temperature resistant filter media. Fiber glass filter media has excellent flow rate.	Thickness			MM	2.2	Singe
	Air permeability			L/dm2/min	130-180	Teflon coating
	Tensile strength	Warp		>=N	1800	Water and oil repellant
		Weft		>=N	1600	PTFE membrane  coating
	Break elongation	Warp		<%	10	Wight ,thickness, finishing style can be made on customized order
		Weft		<%	10
	Work temp	Continuous		>°C	260
		Peak		>°C	300

Fiber glass