4channel voice POTS over E1 pcm multiplexer, China Suppliers and Manufacturers

4channel voice POTS over E1 pcm multiplexer

Supplier Info

Guangzhou Optical Bridge Communication Equipment Co., Ltd.

[China Supplier]

Contact Person : Ms. xiao yanqun

Tel : 86-020-82319302,13760887412

Fax : 86-020-82329792

Product Detail

1.Realize long-distance monitoring of local device to the remote device 2.4 voice channels, support caller ID and anti-polarity

GQ4004 4 channel voice POTS over E1 PCM multiplexer

Introduction

GQ4004 Voice over E1 PCM Mux can provide 1-4 channels voice signal(FXO,FXS) and 1channel 10/100M Fast Ethernet, which realized phone lines and Ethernet signal distance extensions through E1 channel. It is a point-to-point transmission equipment developed based on FPGA Chips.

GQ4004 use TDM (Time Division multiplexing)DBA technology to multiple variety of service signals to E1 channels, to realize multi-service access function, more suitable for users with many types of service , the device offers a variety of service interfaces to support voice,Ethernet,RS232 etc.

GQ4004 is perfect monitoring and alarm, high integration rate ,low power consumption, steady performance, convenient used. It is extensively used in the dedicated networks for power, finance,transportation and police to implement integrated access of voice and data.

The Image of Product

The Interface of GQ4004

1.E1 interface , 75/120 Ohm optional

2.Voice (or other service ) interface RJ45 connector

3.Power outlet and Switch

4.Function settings DIP Switch

5.Indicators(system,voice and other)

6.Ethernet Indicator

7.Ethernet interface RJ45 connector

8.Equipment grounding

Features

Developed from the integrated circuit with our own property rightRealize long-distance monitoring of local device to the remote deviceProvide 1~4 voice channels, support caller ID and anti-polarity chargeSupport FXO and FXS, FXO connect with SPC Exchange, FXS connect with telephoneProvide 1 channel Ethernet interface, supports AUTO-MDIX( cross over and straight through self adapt)Ethernet supports rate of N*64k(N=1~32),which can be regulated from 64K to 1098KProvides two clock types :E1 master clock, E1 line clockSupport 75Ohm unbalanced or 120Ohm balanced impendence Supplied with perfect function of status indication to facilitate maintenance and management

Specifications

E1 Interface

Bit rate:2.048Mbps

Impedance:75ohm unbalanced or 120ohm balanced

Line Code: HDB3, compliance with ITU-T G.703

Electric features of digital interface:compliant with ITU-T G.703 recommendations

Jitter transfer performance: compliant with ITU-T G.823 recommendations

Clock type: Internal clock, line clock

Physical Connetor: RJ 45 or BNC coaxial

Voice Interface FXO(FXS)(RJ45/RJ11):

Standard:conforms toThe Telephone Switch Devices Technology Reference of the Ministry of Posts and Tele Communication

Line code:PCM,64Kbps/per line

Foreign Exchange Office

Alternate Input Impedance:200+680//0.1 Ω

Ring Voltage:35~150V

Ring Frequency :17~60HZ

Return Loss:20 db

Foreign Exchange Station

Alternate Input Impedance: 200+680//0.1 Ω

Subscriber Line Impedance:low than 1KΩ

Peak to Peak amplitude of Ring Voltage:110~150V

Ring Frequency:22~28HZ

Feeding Voltage:48V

Return Loss:20 db

Ethernet Interface

Port Number:1

Speed: 10/100Mbps full/half duplex auto-negotiation

Connector:RJ45

Interface specification: compliance with IEEE-802.3u

RS 232 interface

Electric features of digital interface: compliant with RS232/V.24 recommendations

Transmission rate :asynchronous≤19200bps

Environmental

Operating Temperature: 0 to 70°C (32 to 158F) 5 to 95% RH

Storage Temperature: -40 to 85°C (40 to 185F) 95% RH

Power Requirements

Power Input: AC /DC optional

DC power: DC-48V (-36V~-72V )

AC power: AC220V (185~265V)

Power Consumption: <15Walt

Mechanical Specifications

Dimensions: 485 mm(Weight)×221(height)×44 (depth)