Ads by Google
10G SFP+ 300m MM Module 850nm1. SFP+ 100% compatible with Cisco;
2. SFP+ Data rate: 10.5Gbps;
3. SFP+ QC: ISO, CE, CB, UL, ROHS, FDA, etc;
4. SFP+ Wavelength: 850nm;
5. SFP+ Power supply: single 3.3V;
6. SFP+ Distance: SR;
7. SFP+ Operating temperature: 0C to +70C.
SFP+ 10Gbps SR MM DDM Transceiver ModuleType | Data rate(Mbps) | Description | Laser Transmitter | Encapsulation | Supply Voltage | Data Level |
NTR-S8D803M | 10000 | MM, SR | 850nm VCSEL | SFP+,LC | +3.3V | CML |
Transmitter Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter | Symbol | Min | Typ | Max | Units | Notes |
Average Launch Power | Po, Avg | -6.5 |
| -1.0 | dBm |
|
Optical Modulation Amplitude | Po, OMA |
|
| Note 1 | dBm |
|
Output Center Wavelength | c | 840 | 850 | 860 | nm |
|
Output Spectrum Width | σ |
|
| 0.45 | nm | RMS(σ) |
Laser Off Power | Poff |
|
| -30 | dBm |
|
Extinction Ratio | ER | 3.5 |
|
| dB |
|
Relative Intensity Noise | RIN |
|
| -128 | dB/Hz | 12dB reflection |
Transmitter Disperion Penalty | TDP |
|
| 3.9 | dB |
|
Optical Return Loss Tolerance |
|
|
| 12 | dB |
|
Note 1: Trade-offs are available between spectral width, center wavelength and minimum OMA, as shown in table
2: Output power is power coupled into a 50/125 m single-m ode fiber.
Table-4 Receiver Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V)
Parameter | Symbol | Min | Typ | Max | Units | Notes |
Input Center Wavelength | c | 840 | 850 | 860 | nm |
|
Receiver Sensitivity | Sen1 |
|
| -9.9 | dBm | |
Receiver Overload | PMAX | -1 |
| dBm |
| |
LOS -- Deasserted | LOSD |
|
| -12 | dBm | Transition: low to high |
LOS -- Asserted | LOSA | -30 |
|
| dBm | Transition: high to low |
Los Hysteresis | LOSH | 0.5 | - | - | dB |
|
Receiver Reflectance |
|
|
| -12 | dB |
|