1 Bending top design with thorns 2 Do it yourself assembling ways 3 Anti-rust and anticorrosion. 4 Beautiful linear apperance  1. BRIEF INTORUDUCTION Model M fence ,with bending top and throns ,effectively prevent the people climbing and beautify the landscape. It was widely used in factory boundary, Industrial boundary,Municipal places,Garden enclosure,residential community ,Roadside etc. 

2. ADVANTAGES & FEATURES

1, Professional assembly type signed ,can install easily and quickly.2, Good decoration ,rich color ,can meet different customers on the guardrail products individual requirements.3, Four layers anticorrosive processing, the service life is more than ten years.

3.SPECIFICATIONS    

 Model MA

category	specification	height(mm)	column pile center distance	materials specification
standardtype	MAC1524*2453	1524	2453	Horizontal Rail40*40*1.2Vertical Bar 19*19*1.0posts 60*60*1.5
	MAC1829*2453	1829	2453
	MAC2134*2453	2134	2453
	MAC243882453	2438	2453
reinforced type	MAI1524*2464	1524	2464	Horizontal Rail 45*45*1.5Vertical Bar 25*25*1.2Posts 75*75*1.8
	MAI1829*2464	1829	2464
	MAI2134*2464	2134	2464
	MAI2438*2464	2438	2464

 Model MB

category	specification	height(mm)	column pile center distance	materials specification
standardized type	MBC1524*2453	1524	2453	Horizontal Rail 40*40*1.2Vertical Bar 25*25*1.2Post 60*60*1.5
	MBC1829*2453	1829	2453
	MBC2134*2453	2134	2453
	MBC243882453	2438	2453
reinforced type	MBI1524*2464	1524	2464	Horizontal rail 45*45*1.5Vertical Bar 25*25*1.2Post 75*75*1.8
	MBI1829*2464	1829	2464
	MBI2134*2464	2134	2464
	MBI2438*2464	2438	2464

 

4.STRUCTURES

       

5.SURFACE PROCESSING

   

   

6.TECHNICAL STANDARDS   

Raw materials standard

NO.	PERFORMED STANDARD	NAME OF RAW MATERIALS
1	GB700-88	CARBON STRUCTURAL STEEL
2	GB704-88	HOT ROLLED FLAT BAR
3	GB709-88	HOT ROLLED STEEL SHEET
4	GB708-88	COLD ROLLED STEEL SHEET
5	GB3280-92	COLD ROLLED STAINLESS STEELSHEET

  Galvanized coating & Poyester color coating Standard.

ITME	DESCRIPTION	STANDARD REQUIREMENT	QUOTED              TEST STANDARD
GALVANIZED COATING	APPEARANCE	Accepted appearance shall be free from nodules, Blisters, roughness,sharp points and uncoated areas	ASTM A787-G90   GB/T 13912-2002
	COATING  THICKENSS	Accessories shall be up to 375 g/m2 (Average 26-30 μm), posts, horizontal rails shall be up to 275 g/m2  (Average  26-30 μm)
POLYESTER  POWDER  COATING	APPERANCE	Appearance shall be smooth and shiny, firmly adhered, basically neat, without obvious uneven,density impurity , no toughness feeling of hand touch, steel exposure ,buuble, pin hole, obvious trace are not allowed.
	COATED   THICKNESS	Bottom layer: 40μm~60μm ;  Surface layer:40μm~60μm	GB/T 13452.2-92
	SPECULAR  GLOSS	High gloss >85%    55%<Semi-gloss<75%      Low gloss <30%	ASTM D523-1999
	IMPACT RESISTANCE	50kg.cm	ASTM D2794-1999
	FLEXIBILITY	≤3mm	ASTM D522-2011
	PENCIL HARDNESS	≥2H	ASTM D3363-00
	ADHESION	Not less than grade 1	ASTM DD3359-97
	SALT SPARY       RESISTANCE	3500 hours ,Grade 1	ASTM B117-97
	HUMIDITY          RESISTANCE	3500 hours ,Grade 1	ASTM D2247-99
	WEATHERING      RESISTANCE	1000 hours ;Gloss loss :Grade 1;Discoloring :Grade 1	GB/T 1865-1997

 7.  PROJECT CASES & PRODUCT DETAILS  

        8. WORKSHOP & PROCESSING

OUTERSIDE VIEW

Our factory view from outerside 

INSIDE VIEW

Our factory view from inside. 

  

CLEANING ,DEGERASE,PHOSPHATIZATION PRE-TREATMENT OF WORKPIECES       

Degrease pool         : Dissolve the press oil of the raw materials which will be sure the galvanizing quality.

Phosphatization pool: Enhance the adhesive property of the workpieces which make the color powder is more 

                                   Easily adhere to the metal surface so that make sure the long-term anti-corrosion , rust-                                   proof  and  no powder Color peel off . 

Cleaning pool          : Clean the surface of the workpiece by water spraying processing. 

PUNCHING MACHINES & DRILLERS 

All these machines are used in cutting the designed size and drilling the holes accordind to the darwings. 

POWDER COATING PRODUCTION LINE 

Advanced powder coating line is effectively make 10 years anti-corrosion and rust-proof promise. 

MOULD PROCESSING 

These machines are used to manufacture the connection accessories and another designed fitting parts. 

FOLDING & BENDING EQUIPMENT 

To fold the designed shaped semi-products according to drawing. 

 WIRE MESH AUTO-WELDING PRODUCTION LINE 

To weld the wire mesh panel automatically. 

 

Galvanized powder coated decorative security guardrail