DTSD5168 Three phase electronic multifunction watt-hour meter, China Suppliers and Manufacturers

DTSD5168 Three phase electronic multifunction watt-hour meter

Supplier Info

Hefei Wolian Industrial Co., Ltd.

[China Supplier]

Contact Person : Ms. chen candy

Tel : 0086-577-62731666

Fax : 0086-577-62731777

Product Detail

1.Three phase electronic meter 2.Good reliability,specious appearance 3.Multi-functional 4.Infrared,RS485 5.IEC62053-21

DTSD5168 Three phase electronic multifunction watt-hour meter

FUNCTIONS AND FEATURES

♦ Front board three fixed holes installation, the cover is made of PC material which is transparent and anti-UV molded overall, the base of the meter is made of PC and terminal block is made of quality bakelite material which is moisture-resistant, fire-resistant, high temperature molded overall. It has following features: good weather ability, high rigid, good insulation performance, etc.;

♦ Have six tariffs, may select 12 daily periods of times. Can set the date arbitrary which can automatically read the meter every month. May select single tariff function in weekend. (Please specify when ordering.);

♦ There are a clock and maintenance-free backup lithium batteries in it. Battery capacity detect and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after power cut off.

♦ May select cycle display (default) or push the button itemized display; it can display 14 data at most. Can select the data which to display. The decimal median which displayed can be chosen to set one or two.

♦ There is a polarity port of pulse output passive closed and a no polarity port of pulse output passive distant (the output rate is 10 or 100 imp/kWh, can select). Complying with standard IEC 62053-31 and DIN 43864.

♦ There are far infrared and a port of RS485 communication data. It is used for setting and reading the meter. Set and operation have password protection, communication protocol complying with standard DL/T 645-1997;

♦ Five LED instructions separately represent power state, signal of power impulse, the direction of the trend of load current, the state rates just now and the data communication state.

♦ Detect active and reactive energy, active and reactive power, voltage, current and frequency, etc. of three-phase four-wire forward and reverse. Complying with standard IEC 62053-21 and 62053-23;

♦ Direct connection or input through CT;

♦ Short terminal cover, may select to use extended terminal cover.

SPECIFICATION

Type	Accuracy	Rated Voltage (V)	Rated Current (A)	Starting Current	Insulation Performance
DTSD5168	Active 0.5 /1.0	3x 57.7/100	1.5(6), 3(6)	0.5%Ib	AC Voltage 2kV for 1minute, 1.2/50 μs waveform impulse voltage 6kV
	Active 0.5 /1.0	3x220/380	1.5(6), 3(6), 5(20), 10(40), 15(60), 20(80), 30(100)
	Reactive Class2.0	3 x 100	1.5(6), 3(6)
	Reactive Class2.0	3 x 380	1.5(6), 3(6), 5(20), 10(40), 15(60), 20(80), 30(100)

MAIN TECHNICAL PARAMETER

Voltage Circuit Power Consumption	≤2W
Operation Voltage	0.7Un-1.2Un
Clock Error	≤0.5sec/day (reference temperature); ≤1.0sec/day (the backup lithium battery working time).
Battery	Imported lithium battery voltage:3.0/3.6V; Capacitance> 1000mAh; 1200bps~9600bps; It has the program both inside and outside; Update the data per 0.01 degree; Setup the alarm data of the battery; Loss and press blanking timing and electric consumption rate switches over time in the minimum interval for one minute.

*Please advise us if you have any different specifications, we can make according to your special requirements

DTSD5168 Three phase electronic multifunction watt-hour meter