Ads by Google
Pressure compensation Device DA084
Characteristic:
1.High degree of protection 2.Easy to Install 3.dustproof 4.good quality
Points:
1.It has becomemore andmore important to provide a protected enclosure environment for valuable and crucial electrical and electronic components.
2. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation.
3.When this occurs, the risk of dust and humidity being absorbed into the control panel increases dramatically.
4.The specially designed pressure compensation device DA 084 permits a controlled change in pressure.
5.It can be installed easily in any enclosure. because of the pressure compensation plug's high degree of protection (IP450), the protection type of the enclosure will not be affected.
Technical Data
| Mounting | PG 29 thread with union nut | ||||
| Torque | 5Nm (max. 10Nm) | ||||
| Material | plastic according to UL94 V-0, pebble grey | ||||
| Sealing | sealing gasket NBR | ||||
| Air interface | approx. 7cm² | ||||
| Dimensions | Ø 65.5mm x 30.5mm | ||||
| Fitting position | vertical* | ||||
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) | ||||
Protection type is restricted to IP54 if fitting position of DA 084 is not vertical.
Installation Make cut-out Ø 37+1mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.
Sketch map
Other Datas
| Art. No. | Protection type | 1 packing unit | Weight (approx.) | |
| 08400.0-04 | IP55 | 2 pieces | 62g (31g/pc.) | |
Product show
Maybe you are also interested in these
LCF 013
HGK 470
HV 031
About us ----To creat products that deliver happiness to everyone
2013new pressure compensation Device DA084