Pressure Compensation Device High quality DA284 1.High degree of protection 2.Easy to Install 3. Waterproof membrane

 Pressure Compensation Device High quality DA284

Characteristic:

1.High degree of protection 2.Easy to Install 3.waterproof membrane

4.good quality

Points:

 Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partical vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The easy-to-install pressure compensation device DA 284 provides compensation of pressure at a protection degree of IP66. Even with a slight overpressure, a waterproof membrane inside the plug allows the humidity to escape whilst blocking water and dirt from entering the enclosure.

Technical Data

Mounting	thread M40 x 1.5 with nut
Torque	5Nm (max. 10Nm)
Depth in enclosure	approx. 16mm
Material	plastic, light grey
Sealing	sealing gasket NBR
Filter	waterproof membrane
Air permeability	1200l/h at a pressure difference of min. 70mbar
Dimensions	Ø 60 x 37mm
Fitting position	variable
Operating / Storage temperature	-35 to +70°C (-31 to +158°F)

Installation: Make cut-out +0.5mm in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.

 

Sketch map 

  

Product  show 

 

 Maybe you are also interested in these

LCF 013

  

HGK 470

HV 031

About  us ----To creat  products that deliver happiness to everyone

2013 NEW Pressure Compensation Device High quality DA284