PVC Insulated Wire Factory super low price Aluminum or copper conductor 300V/500V,450V/750V PVC Wire IEC,ISO,AWG,BWG Wire Supply low voltage best quality and pricy Y/G wire /yellow and green wire 

Flexible copper conductors are made from high conductivity Copper rods of 8 mm diameter by using 99.97% pure, electrolytic grade, bright-annealed bare copper with more than 100% conductivity.Copper guarantees higher percentage of electrical energy saving which eventually helps in reducing the electricity bills. The rod is drawn to required sizes of fine wires for the construction of conductors of different areas of cross section. Annealed plain copper conductors used in the flexible cables and cords conform to the requirements of table 3 class 5 of IS:8130-1984. The construction of conductor is also made according to customer specification.

Insulation

Relemac Technologies House wires are mainly available readily in PVC insulations & also manufactured in various other insulations like, FR PVC / FRLS PVC / HR PVC / ZERO HALOGEN & TEFLON (PTFE) With HR PVC.

PVC Insulation

'Type A' PVC Compound suitable for a maximum continuous conductor operating temperature of 70°C, as referred in IS:694-1990, is insulated over conductor by extrusion process with required thickness of insulation and conforms to all the requirements of IS: 5831-1984.

FR Insulation

FR PVC insulation has better fire retardant properties than normal PVC.This FR PVC compound has a high oxygen and temperature index. The wires are wadded with a flame retardant (FR) PVC compound, which helps to control the spread of fire even at very high temperature. It also protects against electrical shock and short circuit.

FRLS Insulation

Whenever fire breaks-out in any building/Complex, the burning of wire emanates, the toxic, black smoke, which causes injury and subsequently becomes fatal to the human life. FRLS PVC insulation provides better fire retardant properties then normal PVC & also emits Low Smoke, in case of fire.

HR PVC Insulation

HR PVC Insulation ensures insulation stability at conductor temperature of 85C & 105C, in case of HR85 & HR 105PVC insulation respectively.

ZERO HALOGEN Insulation

ZERO HALOGEN Insulation provides better flame retardant properties then HR & FRLS. Zero Halogen required >300 Deg'C temperature to catch fire (with 1% Oxygen).

TEFLON (PTFE) With HR PVC Insulation

TEFLON (PTFE) with HR105 PVC are designed for high cost and Sensitive installations where fire from electrical short circuits may cause damage to human life & property. PTFE can withstand,operating temperature from -650C to +2600C.

Comparative  Properties of RELEMAC Wires

Feature	Normal PVC Wire	Heat ResistanceHR-PVC	Fire RetaradantFR-PVC	Fire RetardantLow Smoke FRLS	Zero HalogenLow Smoke
Insulation Material	PVC	PVC	Spl. PVC	Spl. PVC	Spl. Polymer
Insulation Property	Normal	Good	Good	Good	Very Good
Temperature Rating	70 Deg' C	85 Deg' C	70 Deg' C	70 Deg' C	85 Deg' C
Thermal Stability	Normal	Very Good	Good	Good	Very Good
Flame Retardancy	Good	Good	Very Good	Very Good	Excellent
Safety During Burning	Average	Average	Good	Good	Excellent
Requirement of Oxygen to catch fire (% in air)	>21	>21	>30	>30	>35
Temperature Requiredto Catch Fire (with 21% oxygen)	Room Temp.	Room Temp.	>250 Deg' C	>250 Deg' C	> 300 Deg' C
Visibility during Cable Burning (%)	<20	<20	<35	>40	>80
Release of Halogen Gas during burning (% by weight)	<20	<20	<20	<20	Zero
Abrasion Resistance During Installation	Good	Good	Good	Good	Good

Henan Taifa Cable Co., Ltd obtained CIS certificate, SGS certificate, SONCAP certificate and others, we have also attained ISO9001, ISO14001 CCC certifications and others.

Sincerely looking forward to your attention, more specification details about this type or others please contact me freely

Supply low voltage best quality and pricy Y/G wire /yellow and green wire