Battery Continuous Ni Foam (1) Purity: 99.9% and up (2) PPI:110 (3) Packing: 1roll/ctn; 50pcs/ctn (4) MOQ: 10m2

Continuous Nickel Foam

(1) Specification of our nickel foam

PPI: 20-120

Surface Density: 280~3000g/m2

Thickness: 0.3-12mm

Purity: 99.9% and up

SPECIFICATION
ITEM	CONTINUOUS NICKEL FOAM	THICK NICKEL FOAM
THICKNESS	(0.3~2.5)±0.05mm	(2.6~12)±0.05mm
PPI	90~120	20~80
SURFACE DENSITY	(280~1800)±30g/M2	(400~3000)±30g/M2
TENSILE STRENGTH	(VERTICAL)≥130n/CM2 (HORIZONTAL)≥100n/CM2
ELONGATION	(VERTICAL)≥5%         (HORIZONTAL)≥12%
POROSITY	≥96%	≥96%
WIDTH	(50~960)±0.5mm	(50~960)±0.5mm
SPLICE FREQUENCY	200m≤4 junction	largest length 1000mm
RATIO RESISTANCE	≤5X10-6	≤5X10-6

(2) Applications

Application of Nickel Foam

Thermal management and heat transfer Electrochemistry and catalysts Water and air purification/filtration Biomedical implants Flow control devices Acoustic

There are also plenty of flieds of applications for open-cell metal foams, including:

Metal Foam can significantly increase specific surface area and repetability, while maintaining the lowest production costsMetal foam wicking structure for cylindrical, flat, and loop heat pipes that perform in any orientation Cold plates with a metal foam core for electronics cooling without the high cost of micromatching High surface area boiling / evaporator plates for increased critical heat fluxes High surface area porous electrodes to increase electrochemical reaction efficiency

Contact Details:

Linda

M.B.: 0086-15865804084

FAX: 0086-530-3962566

110ppi Ni Foam