Ads by Google
| Table 1 Battery Specification | |
| ITEM | SPECIFICATION |
| Cell assembled mode | 7P12S |
| Typical Capacity | 10Ah/0.2C 25º C |
| Minimum Capacity | 9.6Ah/0.2C 25E-Bike Battery |
| Nominal Voltage | 36 V |
| Charging Ending Voltage | 43.8± 0.1 V |
| Discharge Ending Voltage | 30± 0.1 V |
| Standard Charging Current | 2A |
| Standard Discharge Current | 2A |
| MAX Discharge Current | 10A |
| Internal Resistance | < 200m |
| Weight | 5± 1kg |
| Table 2 PCM Electrical Characteristics | ||||
| TYPE | FUNCTION | ITEM | PARAMETER | ACCURACY |
| BATTERY | Chemical system | LiFePO4 | ||
| Capacity | 10AH | |||
| Working voltage | 3.2V | |||
| Series number | 12 | |||
| The function of the BMS | Overcharge protection | Over charge voltage | 3.9 | ± 50(mV) |
| Output delay of overcharge | 1000 | ± 100(mS) | ||
| Over charge release voltage | 3.8 | ± 50(mV) | ||
| Over discharge protection | Over discharge voltage | 2.3 | ± 50(mV) | |
| Output delay of over discharge | 200 | ± 50(mS) | ||
| Over discharge release voltage | 2.3 | ± 50(mV) | ||
| Over current protection | Over current protection | 50 | ± 2(A) | |
| Output delay of over discharge-current protection | 500 | ± 50(mS) | ||
| Qualification of release from over current protection | Cut off load | |||
| Short circuit protection | Short circuit protection current | 80 | ± 10A | |
| Output delay of short protection | 200 | ± 100uS | ||
| Qualification of release from short protection | Cut off load | |||
| Temperatureprotection | Temperature protection (E-Bike Battery ) | 65 | ± 2(E-Bike Battery ) | |
| Temperature Protection Release(º C) | 55 | ± 2(E-Bike Battery ) | ||
| Cell balance | Bleed Current(mA) | 60 | ± 60(mA) | |
| Bleed Start Point(V) | 3.6 | ± 10(mV) | ||
| Bleed Accuracy(mV) | 30 | ± 5(mV) | ||
| Main circuit resistance | Main circuit resistance(mΩ ) | < 30 | ||
| Current Consumption | Current Consumption (mA) | < 20 | ||
E-Bike Battery 36V 10AH, LiFePO4 battery 36V10AH, power battery 36V 10AH Battery Specification Refer to Table 1 PCM Electrical Characteristics Refer to Table 2 The Size of E-Bike Battery 24V 10AH Inside diameter Height of the plastic part Note 285*94.7*72 107 output plug is in the head 1. Guarantee: 3 years Guarantee 2. E-Bike Battery Certificate: Shipping certificates: UN38.3, MSDS, 1.2M Drop test Products certificates UL, CE, RoHS Factory certificates ISO9001-2000
LiFePO4 E-Bike Battery 36V10ah