I. Use instrution
Fitted with two 3A/LRO3/UM4(NO.7)battery in the WIR-2010C and be used with the transmitter ,please pay attention the battery polarity.Turn on,adjust the volume,you can listen now.Adjust the L/R channel for the best sound."off" means turn on/off," A" means A channel,:"B"means B channel.II.Features:
1. Compatible with any audio devices with IR transmitter built-in;
2. IR dual channel wireless headphone function,receive stereo crystal clear sound from audio devices wirelessly without interference from other radio transmission sources;
3.Ultra light design for comfortable wearing;
4.Auto mute function and automatic shut-off after 10 min of no signal detection;
III.Technical Parameters:
Receiving frequency:A channel: left channel :2.3Mhz / Right channel: 2.8Mhz
B channel: left channel : 3.2Mhz Right channel: 3.8Mh
Frequency response: 20Hz~20KHz
Power supply: DC 2V~3.3V
Working current: 22mA+-5mA
Receiving distance: about 5M
Power output:>=8Mw
S/N ratio:>=60db
IV.Clear general trouble
question | trouble analysis | solutions |
no voice | The headphone is turned on,or the battery has power? | turn on |
The USB cable of transmitter error | reconnect | |
noise | Low-quality audio/Near the sun/Transmitter was blocked | readjust |
poor sound quality | Low-quality audio | adjust audio |
The battery has not enough power | charge battery |
Please note the following things in order to ensure good sound quality:
1.This product an not be used outdoors,because of the ultraviolet sunlight interference;
2.Do not use the headphone near the sunlignt to avoid the noise interference;
3.To ensure good reception,please try to keep headphone in front of the transmitter;
4.Do not use the low-quality audio,that will damage the headphone,or make a big noise;
5.When the power is low,the sound will distorted,please charge the battery;
6.Adjust the input audio volume,no too small or too large;
7.A long time no use please get the battery out.
IR headphone,wireless headset .Free shipping !