Industrial Plastic Dehumidifier Dryer 1.saving electricity 70percentage 2. No need to use cooling water 3. no exhaust of dust

Industrial Plastic Dehumidifier Dryer

Features:

1. Improve the quality of molded parts;

2. Energy saving, high performance;

3. Stable dehumidified air supply at -40 degree dew point;

4. Fully stainless steel shutter for material delivery;

5. Close-looped supply for dehumidified air and material system;

6. User-friendly operation, bilingual (English/Chinese) control panel;

7. Intelligence PLC control panel C/W alarm & Pre-heat settings;

8. In addition to the three optical-grade power-in-one dedicated to clean or purification plant.

Optical level triad dehumidifying drying material supply equipment

1-to-1dehumidifying and feeding system

1-to-2 dehumidifying and feeding system

Dimensions:

Model		TCDE-15	TCDE-25	TCDE -50	TCDE -75	TCDE -100	TCDE -150	TCDE -200	TCDE -300	TCDE -400
Hopper Capacity	KG	15	25	50	75	100	150	200	300	400
Drying Heater Capacity	KW	3.5	3.5	4	5	6	9	12	15	18
Drying Blower Capacity	KW	0.135	0.135	0.175	0.175	0.2	1.1	1.5	2.2	3
Conveying Blower Capacity	KW	0.75	0.75	0.75	0.75	1.1	1.1	1.1	1.1	1.1
Air Capacity	L/min	50	65	70	82	120	155	195	305	410
Power Supply	V	AC380V,3P 50/60Hz
Control Voltage	V	AC220V, 1P
Total Power	KW	4.5	4.5	5	6	7.5	11.5	15	18.4	22.5
Wires Specifications		4×4				4×6		4×10
Wires Length	M	6
Dimensions	L(mm)	815	815	897	932	968	1169	1197	1630	1676
	W(mm)	837	837	897	932	968	998	998	1036	1120
	H(mm)	1587	1797	1898	2030	2160	2264	2355	2646	2660
Dew point	°C	Below -40
Material Pipe Size	inch	1.5
Hopper Receiver		TAL-3SE				TAL-6SE
Weight	KG	159	160	182	205	217	316	332	400	430
Option		1.Dew-point Indicators 2.Cyclone Separator 3.High Temperature(150°C~180°C)

Industrial Plastic Dehumidifier Dryer