Ads by Google
Automatic Photocell Sliding Door Operator
Sectional Drawing
More Intelligent
1.Apply the SLM Controller Area Net-work bus techniques and the optical fiber ,which have "Equipment Fault Diagnosis Method" ability and improve the the data transmit and exchange between sensor, microcontroller, and other electronic equipments.
2. Adopt the imported ST,NXP chips and Philip components and SLM Control Program
3. Equipped with BEDIS control panel
4. The motor device has optical encoder which can control the door working more accurately
More Quiet
1. The hardware system apply the RECORD 16STA materials. The roller track with adhesive foam tape to absorb the carriage movement vibration. The Carriage adopts the unique rubber to reduce the noise and static electricity. Meanwhile, the anodized aluminum idle roller also can reduce the noise
2. Thanks to the track's design ,there is almost no noise when door work. Don't like the normal door operator ,you need to adjust the speed and buffer speed to a value ,then the door can work smoothly.
3. The 36V,100W bruth motor with high torque 3400r/min ,Max speed 70cm/s with little noise lower than 30db
More Safe
1.CANbus can promise the door 's electronic components work alone relatively . One issues can affect the others and can diagnose the issue to remind you to make a repair
2.Backup battery can promise the door' longer working if power fail or fire
3. If fire ,the door will out-of-lock for people to escape
4. BEA photocell to prevent people from clipping
More reliable
1. RECORD 16 STA hardware system to promise the door's working stably
2. Imported sensor to guarrentee the door's open and close safety
3. 5mm thickness, modularization design of track to promise hold more weighted door leaves like 250KG and hanger a second motor device
4. The door can install at 3-4m height
Specification
| Door model | Single | Bi-Parting | |||||
| Door width | 800-3000mm | 800-3000mmn | |||||
| Door weight | 150kg | 150kg x 2 | |||||
| Opening speed | 0.7m/s | 0.6m/s | |||||
| Clsosing speed | 0.7m/s | 0.6m/s | |||||
| Hold on time: | 0-20s | ||||||
| Motor | Dunker motor GR 63 * 55, 60V, SG80K, WL2, i=10:1, RE20S or normal motor | ||||||
| Microcontroller | 32bit 30Mhz ST MCU, CANbus techineques | ||||||
| Adjustable parameter | Speed,Opening Width,Holdon tim,Original reseting | ||||||
| Power supply | 110V-250V,60Hz/50Hz | ||||||
| Profile size | 4200mm(L)x 200mm(H)x 160 mm(W) | ||||||
Components
(ONE) | Control SystemGilgen SLMSystem) | |||
1 | Motor | 1 set | Dunkermotoren | |
2 | Encoder | 1 set | GeLDe | Optical |
3 | Control unit | 1 set | PHILIPS | PHILIPS ,NXP, ST MCU |
4 | Radar | 2 sets | BEA | Microwave sensor |
5 | BEDIS control panel | 1 set | GeLDe | Binary system |
(TWO) | Mechanical parts(RECORD 16STA System) | |||
1 | Hanger track | 1 set | High strength, 5mm thickness | |
2 | Moving track | 1 set | rubber ,three modules | |
3 | Carriage wheel unit | 4 sets | ||
4 | Belt clip | 2 sets | ||
5 | Drive timing belt | 1 pc | fiberglass tensile elments,nylon surface,8 | |
6 | Reversed wheel | 1 set |
| |
7 | Stopper | 4 pcs | ||
(THREE) | Optional parts (Battery , BEA photocell, cover, lock | |||
Our being to bring your life,your family,your friends hapiness, comfort is our eternal aim