FP-C Fireproof Cable Coating is highly effective combustion-resistance coating that inflates when burning with fire

We are a high-tech enterprises in the nuclear-radiation-resistant composite functional

materials, and we have supply fire proof materials and construction design to different Chinese

power station, water power station, hot power station, nuclear power station includeed.

FP-C Fireproof Cable Coating is highly effective combustion-resistance coating that inflates when burning with fire, characterized by its expansion of volume up to 1D times the original size and a formation of fine carbonized layer. Due to its effective resistance of combustion, it finds its wide application in fireproof for cables.Its technical index reaches the GB/t18380.3-2001 standard.(note: GB/t18380.3-2001 has replaced original GA181-1998)Advantages: Water-based;Halogen free, poison free, corrosion;free and environmental friendly;Effective combustion resistance;Expansion of iits volume when burning with fire;Easy to install.Technical Index:(Note: The following data is based on estimated value, not on test results)

No	Items	Technical Index
1	State in the container	Even
2	Fineness	≤90μm
3	Stickiness	≥70s
4	Drying time	Surface dry=5hours, content dry =24 hours
5	Oil resistance	GA181-1998
6	Salt resistance	GA181-1998
7	Humidity and heat resistance	GA181-1998
8	Cold-heat circulation resistance	GA181-1998
9	Bend resistance	GA181-1998
10	Combustion resistance	Carbonization≤2.5m

Installation InstructionsPreparation:1.Keep the cables and their supporting structures clean and dry. Clear off dust debris and greasy dirt.2. Agitate the coating evenly. Do not add water or any other substances in it.3. Apply or spray the FP-C to appropriate length with a 0l.029 nozzle at a 400 angle.Instructions concerning the certification standard:1.According to IEC 332 test standard, thickness of the coating in dry state shall not be less than 0.55mm.2. According to FM certification standard. Thickness in dry state shall reach 1.6mm.Usage amount:1 .Apply to a thickness of 0.55mm in dry state:2. Consumption amount for surface leveling may be 0.55kb/m2;3. Consumption amount for cable bundles or bridge structures may be 1-1.5kg/m2.(varying with the quantity cables. Operational methods and wear and tear)

Cable Coating- fire proof