Ads by Google
Pebble embossed FRP fiberglass skin for RV ,truck door plates
Jinyi fiberglass Door Skin panels are made from high quality thermoset polyester resins with U.V. inhibitors and have a Class C fire rating. The surface is available with a textured embossed or smooth finish that is aesthetically pleasing. Panels are suitable for use as a permanent exterior that may be exposed to the elements in a wide variety of climates.
The special benefits of the material here are its low heat expansion and excellent water-repelling properties. Doors will not warp due to temperature influence or moisture absorption. Jinyi FRP does not absorb moisture.
Physical Properties | |||||
Product Code | Nominal Thickness | Nominal Weight |
Finish |
Length |
Width |
DS |
0.045"
1.14 mm |
0.33 lbs/ft2
1.61 kg/m2 |
Smooth |
Max length of '
12m |
0.5 m - 2.6 m |
0.055"
1.4 mm |
0.39 lbs/ft2
1.90 kg/m2 | ||||
| |||||
Physical Properties | |||
Typical Values | |||
Property | SDSC | 0.045" | SDSC | 0.055" | Test Method |
Flexural Strength | 25 x 10 psi 172 MPa | 30 x 10 psi 207 MPa |
ASTM - D790 |
Flexural Modulus | 0.75 x 10 psi 5171 MPa | 0.75 x 10 psi 5171 MPa |
ASTM - D790 |
Tensile Strength | 13 x 10 psi 90 MPa | 13 x 10 psi 90 MPa |
ASTM - 638 |
Tensile Modulus | 0.85 x 10 psi 5861 MPa | 0.85 x 10 psi 5861 MPa |
ASTM - 638 |
Barcol Hardness |
40 |
40 |
ASTM - D2583 |
Impact Strength (IZOD) ** | 10 ft-lb/in 0.53 J/mm | 8 ft-lb/in 0.43 J/mm |
ASTM - D256 |
Coefficient of Linear Thermal Expansion | 1.6 x 10-5 in/in/°F 29 μm/m/°C | 1.6 x 10-5 in/in/°F 29 μm/m/°C |
ASTM - D696 |
Water Absorption |
0.3%/24 hrs@77°F |
0.3%/24 hrs@77°F |
ASTM - D570 |
Conductivity (K Factor) | 1.2 BTU • in/hr/ft /ºF 14.9 kcal • cr/hr/m2/ºF | 1.2 BTU • in/hr/ft /ºF 14.9 kcal • cr/hr/m2/ºF |
ASTM - C177 |