DIP Switches .MECHANICAL 1Operation Force :6.0N Max 2Stroke : 0.90mm 3Operation Temp : -2070

DIP Switches

.MECHANICAL 1Operation Force :6.0N Max 2Stroke : 0.90mm 3Operation Temp : -2070 4Storage Temp : -40 to 85 .ELECTRICAL 1Electrical Life : 2000 operations cycles per switch 24 VDC, 25mA 2Non-Switching Rating : 100mA, 50VDC 3Switching rating : 25mA, 24VDC 4Contact resistance : (a) 50 mΩ max. at initial (b)100mΩmax. after life test 5Insulation Resistance : 100MΩ, 500VDC 6Dielectric Strength : 500VAC1 minute 7Capacitance : 5pF max 8Circuit : Single pole single throw .SOLDERING AND CLEANING PROCESSES 1Keep all switch contacts in their OFF position for all operations 2WAVW SOLDERING : Recommended Solder Temperature at 500°F (260) max. 5 seconds 3HAND SOLDERING : Use a soldering iron of 30 watts, controlled at 608°F (320)approximately 2 seconds while applying solder 4CLEANING PROCESS : Flux clean using force rinse, high agitation or triple bath cleaning method. Freon TF or TE give excellent results. When vapor methods are used do not subject the switch to solvents at temperature above 125°F (51) .MATERIALS 1BASEENGINEERING PLASTICS,Black 2COVERENGINEERING PLASTICS,Black 3BUTTONENGINEERING PLASTICS,White 4TERMINALAlloy Copper, Gold plating .PACKING All DIP Switches are shipped in standard IC tubes with all poles in the OFF position.

DIP Switches