High Power LED Lamp Bead 1W with Epileds 110-120LM Without Heatsink CE and RoHs Approved, China Suppliers and Manufacturers

High Power LED Lamp Bead 1W with Epileds 110-120LM Without Heatsink CE and RoHs Approved

Supplier Info

Shenzhen Highlight Electronics Co., Ltd.

[China Supplier]

Contact Person : Mr. xu Devin

Tel : 086-0755-27471835

Fax : 086-0755-27480569

Product Detail

1W High Power Cool White LED Diode 1. Taiwan Epileds Chip 2. 90/120 degree beam angle 3. 3 Years of warranty

High Power LED Lamp Bead 1W with Epileds 110-120LM Without Heatsink CE and RoHs Approved

Application

Signal lighting

Flashlight ,Headlight

Decorative,entertainment and landscape lighting

backlighting

Notes

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25mm(0.010") unless otherwise noted.

3. Protruded resin under flange is 1.0mm(0.04") max.

Absolute Maximum Ratings at Ta = 25°C

Items

Symbol

Absolute maximum Rating

Unit

Forward Current

350

Peak Forward Current*

IFP

1000

Reverse Voltage

Power Dissipation

1100

Operation Temperature

Topr

-30 ~ +90

°C

Storage Temperature

Tstg

-40 ~ +110

°C

ESD Sensitivity

2000

LED Junction Temperature

120

°C

Manual soldering Time at 260°C(Max)

Tsol

seconds

Notes:

1) IFP≤ 100μs, Duty cycle=0.25

2) It is strongly recommended that the bottom of the lead frame be not higher than 80°C.

Typical Electrical Optical & Thermal Characteristics ( Ta = 25°C)

Items	Symbol	Condition	Min.	Typ.	Max.	Unit
Forward Voltage	VF	IF = 350mA	3.0	3.2	3.4	V
Reverse Current	IR	VR = 5V	---	---	10	mA
Corelative Color Temperature	Tc	IF =350mA	2500	6000	6500	K
Chromaticity coordinates	X	IF =350mA	---	0.47	---	---
Chromaticity coordinates	Y	IF = 350mA	---	0.42	---	---
Luminous Flux	ψV	IF = 350mA	100	110	120	lm
50% Power Angle	2q½	IF = 350mA	---	120	---	deg
Thermal Resistance(Junction to Bottom)	RqJ-B		---	10	---	°C/W

Important Notes:

1) All ranks will be included per delivery, rank ratio will be determined by Senba.

2) Tolerance of measurement of luminous flux is ±15%.

3) Tolerance of measurement of Vf is ±0.1 V.

4) Use alcohl-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.

Material Introduction

Chip US bridgelux ,Taiwan epistar,Taiwan epileds,Taiwan genesis,also we are vip customer for Bridgelux Inc for nearly 3 years. Gold wire Germany Heraeus 99.999% high purity gold wire,as we know metals expand with heat,high purity gold has higher ductility,low electricity resistance. Epoxy/Silicon Glue Dow Corning higher temperature resistance,lower rate of oxidation reaction,keep transparent for longer time. Phosphor powderUSA Intermatix fine and smooth,uniform in size,better performance in lumens. better light-emitting uniformity.

High Power LED Lamp Bead 1W with Epileds 110-120LM Without Heatsink CE and RoHs Approved