Ads by Google
Direction for use
Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;Adopt film button and RF for controlling, there are 8 buttons in all, the function of each key as follows:(1): you could turn on/off controller at any time;
(2): Play/pause button, it is convenient for you to see the static effect of led;
S+(3): press once,change speed +1, total 100 grade.
S-(4): press once,change speed -1.
B+(5): Brightness control of the output signal each press changing speed +1, total 256 grade.
B-(6): press once,change brightness -1;
M+(7): The NO. of patterns add 1 by each pressing;(refer to the following form)
M-(8): The NO. of patterns subtract 1 by each pressing;
3. Standard changes function as the following form:
No | Patterns | Remarks |
1 | Static red | Brightness is adjustable, Speed is nonadjustable. |
2 | Static blue | |
3 | Static purple | |
4 | Static green | |
5 | Static yellow | |
6 | Static cyan | |
7 | Static white | |
8 | Three-color jumpy change | Speed and brightness are adjustable |
9 | Seven-color jumpy change | |
10 | Three-color gradual change | Speed is adjustable. |
11 | Seven-color gradual change | |
12 | Red flash | |
13 | Blue flash | |
14 | Purple flash | |
15 | Green flash | |
16 | Yellow flash | |
17 | Cyan flash | |
18 | White flash | |
19 | R/B color alternant gradual change | Speed is adjustable, Brightness is nonadjustable. |
20 | B/G color alternant gradual change | |
21 | G/R color alternant gradual change | |
22 | Seven-color jumpy change (external signal) | Speed changes with the voice swing, brightness controlled with the volume, the higher volume is, the greater the brightness. |
RGB reomto & Manual RF audio controller