Ads by Google
LED dimmer touch:
Technical Parameters
1. Working temperature: -20-60 °C
2. Supply voltage: DC12V
3. Output: 1 Chanel
4. Static power consumption: <1 W
5. Output current: <8A
6. Output power:12V<96W
7. Work for 6.6M strip with 60 chip each meter, and 13M strip with 30 chip each meter
Direction for use
Stepless dimming:
when the power is OFF, OFF switch from ON,
LED intensity gradually increased from 0% to 100% of full bright state.
press the touch, dimming cycle:.
(A) if it is in OFF state, a long time to start the cycle from minimum brightness dimming.
(B) if it is in ON state, in the beginning of the cycle from the current brightness dimming.
(C) if the loop is to high-brightness dimming dimming, raised the maximum is still not release the fingers, the automatic brightness adjustment to a lower, not yet adjusted to the minimum open fingers, then again to the high brightness be adjusted to the required brightness, release your finger .
Lway by dimming cycle dimming:.
Press cycle during dimming Release your finger to stop the current status of the brightness, and then resume when the press cycle dimming, dimming direction to the direction of dimming, the reverse is the purpose of dimming long process by dimming the brightness adjustment, if overdone, can be modified to the back.
Summarization
Touch dimmer can be achieved dimming without the controller. With touch control, the user can according to actual needs, transfer the light to the appropriate brightness.
LED dimmer touch