Ads by Google
Product Functions:
The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being tested. CR2000 common rail Tester can used for testing following pumps:BOSCH CP1, BOSCH CP2,BOSCH CP3,DELPHI, SIEMENS, DENSO HP2 AND HP3.
Main Feature
* Ali the parts are put in the protective box* Modulated driving signal to ensure the safety of the CR pump* Adjustable duty cycle for the driving signal* Short circuit protection for the output circuity of the solenoid driving signal* Measure and LCD display the rail pressure* To test if the CR injector is still function,to connect a CR injector to a high pressure fuelline and to the CR tester by harness*The testeris set to continuous injection mode.* The CR injector is in normal condition,if it is capable to inject fuel under the driving signals by the tester* To test injector spray atomization,to connect a CR injector to a high pressure fuelsource by a high pressure fuel line and to the CR tester by harness.The tester is set to single injection mode to allow observing the nozzle spray pattern to judge if the nozzleis normal or orifice plugged.* Checking the injectors returm oil and injection oil.