Ads by Google
Specification of Linear actuators:
Max. Thrust 8000N, Max. Pull 5000N
Voltage of AT Linear Actuator: 24VDC or 12VDC, Permanent Magnet Motor Drive
Chrome Plated Piston Rod eye with slot
High Strength Plastic Housing and Gears
Elegant and compact design with small installation size
Standard protection class: IP 54
Built-in integral limit switch, not adjustable after leaving factory
Scratch and wear-resistant powder
Painting on outer tube Φ30mm
Stainless Steel Back Fixture
Strong wear and corrosion resistant stainless steel inner rod
Standard Stroke of linear actuator: 100/150/200/250/300/350/400 mm, special stroke are available according to customer' requirement.
Duty cycle: 10%, comment: 2 minutes continuous work followed by 18 minutes rest
Ambient temperature -5°C (23F) to +40°C (104F)
Low noise design, dB<48(A); The inspection method is in accordance with DS/EN ISO3746 while linear actuator is unloaded.
Overload protection
CE Certificated Linear Actuator
Availability in Black, White and Blue housing.
Standard Stroke of Linear Actuator and Min. Install Dimension
Standard Stroke mm | <110 | 150 | 200 | 250 | 300 | 350 | 400 | |
Min. Install Dimension mm | 4000N 6000N | >285 | 325 | 375 | 425 | 475 | 525 | 575 |
8000N | >325 | 325 | 375 | 425 | 475 | 525 | 575 | |
Technical Specification of Linear Actuator
Item No. | Max. Thrust (N) | Max. Pull (N) | Self-Lock (N) | Speed (mm/s) | Duty Cycle (min/h) | Current at full load(A) | |
Full load | No load | ||||||
4000N | 4000 | 3000 | 4000 | 5 | 6.5 | 6 | 3.3 |
6000N | 6000 | 3000 | 6000 | 4.2 | 6.2 | 6 | 3.8 |
8000N | 8000 | 5000 | 6000 | 5 | 6.5 | 6 | 6 |
linear actuator