We can produce copper mould tubes according to customer's specifications completely.

Zibo HITECH Material CO.,LTD can produce various copper mould tubes,including square copper tubes,rectangular copper tubes,round copper tubes,non-standard copper mould tubes

Copper moulds have played an important role in the development of the continuous casting process .Their function is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification. The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion, and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.

QUALITY

MATERIAL	CuDHP	CuAg	CuCrZr	CuNiP
Melting point	1.083°C	1.083°C	1.078°C	1.080°C
Coefficient of thermal expansion at 20°C	1,68 10-5	1,68 10-5	1,70 10-5	1,68 10-5
Thermal conductivity at 20°C	340W/(m.K)	377W/(m.K)	325W/(m.K)	284W/(m.K)
Recrystalization	330°C	370°C	700°C	600°C
Hardness at 20°C	93HB	95HB	125HB	115HB

SPECIFICATION

Name	Size(mm)	Caber radius	Thickness	Length
Square Copper tube	50*50~500*500	4000-17000 Also straight	6~50	700-1000
Rectangular copper tube	(100~500)*650	4000-17000 Also straight	6~50	700-1000
Round copper tube	Diameter110~1200	5000-17000 Also straight	10~50	700-1000
Non-standard copper mould tubes		6000-17000	12~50	780-1016

Our detailed specifications for copper plate are following:

Copper plate size	Specifications(mm)			Material	Coating
	Length	Width	Thickness
Retangular	700~1000	300~3800	30~65	CuCrZr,CuAg	Ni-Co,Ni-Fe
Beam blank	700-1016	280-480	80-140	CuCrZr,CuAg	Ni-Co,Ni-Fe

Deoxidized phosphorus Rectangular copper mould tubes