control system box: in a helicopter setting control box; surface treatment: above all on computer white paint

1, power equipment: adopt 1 HP Taiwan motor and reducer for 70 type, ratio for 0, 1 HP by Ed the frequency converter to regulate the speed, speed range: 1-5 m/min.

2, line body guide: the 40 x 40 mm steel the production.

3, PVC leather belt: the 2 mm thick green anti-static belt, seamless interface, width is 400 mm.

4, line body feet frame: the 40 x 40 mm steel the production.

5, line body fixtures : the 40 x 40 mm steel the production.

6, belt roller: the  25 galvanized roller production.

7, belt supporting the board: the 1.2 mm steel production.

8, lighting system: the double a covered 20 W fluorescent lamp, bilateral configuration.

9, process procedure: use of a special "H" type aluminum, all fronts be well versed in, match with the A3 slab.

10, instrument table platform: specifications for 400 mm wide, bedplate adopts 16 mm thick wood production, put white fire prevention board, semicircle batten bag edge.

11, strip the specifications for 250 mm wide, bedplate adopts 16 mm thick wood production, put green anti-static rubber, half logs bag edge. 750 mm high from the ground.

12, socket system: trough the aluminum production, size is 40 x 60 mm, trough wire with 4 square line, with two multi-function firm not fall socket, 1 set per meter.

13, control system box: in a helicopter setting control box.

14, surface treatment: above all on computer white paint

PVC line/manual insert line / LCD module line/ plug-in line