Rough top Conveyor belt is the most commonly used impression top belt ,used in a wide variety of package handling applications.

Rough Top Conveyor belt is designed for transporting light weight goods, either being inclined or being horizontal, also suitable for transporting fragile or deformed materials and pack goods, such as glass, papers, bags, boxes or cartons to a maximum of 35 degrees.

Features:

.1. The bareback Rough Top belt makes less friction coefficient, suitable for running over a table and flat panel.

2. The design of mesh-like pattern on the top surface cover can generate the relief effect, absorbing any vibrations and impacts exerted on the materials conveyed and simultaneously preventing the material from slip.

Construction and Properties

 2 or 3 ply construction with cut edges and a carcass of synthetic EP fabric. The surface

texture resists the tendency for the material to roll back down the conveyor. The black top  cover is recommended for utility type incline service while the tan cover is suggested for transporting packaged food products where an odorless, non toxic, non marking belt is a necessity. Top cover is a full 1/8 thick SBR  and the back  is protected by either a durable friction surface bottom or a synthetic bare-back for slider bed applications. 

2 or 3 ply construction with cut edges and a carcass of synthetic EP fabric. The surface

texture resists the tendency for the material to roll back down the conveyor. The black top  cover is recommended for utility type incline service while the tan cover is suggested for transporting packaged food products where an odorless, non toxic, non marking belt is a necessity. Top cover is a full 1/8 thick SBR  and the back  is protected by either a durable friction surface bottom or a synthetic bare-back for slider bed applications.