Double Work Stages Vacuum Laminator It is applicable to laminate cover lens onto 3.5'~12' LCD or ITO inside vacuum chamber.

 PW-M1039 Double Work Stages Vacuum Laminator

Machine Function

1.1 The machine is used for rigid to rigid lamination. Manually load and unload cover lens and ITO or LCD.I

      TO or LCD position by fixture. After finished position, press start buttons by both hands and work stage

      move inside. Then sealed container will seal the stage. When negative pressure reach setted value, lamination

       work begin.

1.2 It is applicable to laminate cover lens onto 3.5'~12 LCD or ITO inside vacuum chamber. (Rigid to rigid lamination)  

1.3 Optional left stage and right stage operation or double stages for alternative work.  

 

Basic Parameters

Weight(Kg):Appro. 400KG

Dimension(mm):(W)1000 x (D)910 x (H) 1750mm

Work Table Size:300×335mm

Power Supply: 3phaseAC380V/50Hz/2KW

Laminating Product Size:3.5″~12″

Laminating Accuracy (mm):≤±0.05mm

Operation Mode of Work Table:In-out double stations 

Ambient Requirement:Clean without dust, clean room.

Heat Temperature Range:25~100°C

Work Pressure:0.40~0.70Mpa 

Production:50ses/2pc, that is to say, production will be 1200pcs/day according to 20hrs/day.

                Base on 7' hard to hard standard testing.Single circle time is 50 secs.

Double Work Stages Vacuum Laminator