Ads by Google
AH Series hydraulic oil cooler
Small size hydraulic system:
AH Series :
In order to avoid cracking , when cooler is installed in the return oil circuit, a bypass uploading valve must be parallel connected . And make sure the upload can be opened first when the decompression valve reaches the pressure peak.
The best recommendation operation: Use another oil pump to extract hot oil to supply the cooler so as to form a independent circulation loop.
The technical data of AH Series:AH0607, AH0608, AH0608L
Power supply: AC 380V ,220,110 DC 24V ,12V
Protection class: IP 54;
Noise:42Db
| Model | Flow rate(l/min) | Power(w) | A1 (±10) | B (±25) | C1 (±10) | D1 (±2) | D2 (±2) | E1 (±5) | F | Z |
| AH0607 | 3-60 | 35 | 200 | 115 | 245 | 66 | 222 | 155 | 8.5*15 | RC 3/4" |
| AH0608 | 3-60 | 35 | 200 | 115 | 320 | 66 | 289 | 215 | 8.5*15 | RC 3/4" |
| AH0608L | 3-60 | 70 | 200 | 125 | 410 | 76 | 388 | 318 | 8.5*15 | RC 3/4" |
Maximum static pressure:20 Bar (higher pressure made to order)
Rated inlet tempreture:70 °C (below 130 °C can be custom made)
AH Series hydraulic oil cooler