Ads by Google
We are experts when it comes to cold, freezer rooms and blast freezers. We have supply the cold room equipment and provide the cold room installation service.
With our fast insulating panel manufacturing line we are capable of doing any scale of project. In the cold and freezer room industry we mainly use plain panels. |
For transporting all panels are stacked on top of each other. All angels, flashings and channels are wrapped together. Blower coils and condensing units are crated in wood boxes and all smalls (strip curtains, expansion valves, pop rivets, fishers, silicone etc.) are placed in the condenser box.Our condensers are all ready assembled when it leaves our factory. All condensers are designed for your individual application and ambient. They also include an electric box with components.
We mainly use pack units.
We also have a wide variety of evaporator available to match a condenser unit.
With all our cold rooms we supply the correct amount of angels, channels, flushings, silicone, pop rivets and fishers.
Typical cold room panel construction accessories.piping and wiring:
We supply from 80mm panels up to 150mm panels, depending on your application. With most cold rooms an insulated floor is not necessary, but with all freezer rooms and blast freezers it is compulsory.We have two methods of insulated floors.
We manufacture hinge doors up to 1.4m wide and any size sliding doors. All doors are equipped with a safety striker inside, so if a person is trapped in a cold or freezer room, the door can still be opened from the inside even if it is locked.Our doors are made thinner than the panels, but with a higher density 40DV (40kg per m2). With a double lip seal the sealing capabilities are excellent. All low temp doors are fitted with a heater to prevent the door from freezing up and not opening. The door hinges are camlift type to prevent the bottom seal from wearing.
Freezer Chamber And Cold Room Project Installation Service