Plastic Tube Clamp 1.DIN3015 standard products 2.Flexible combinations 3.Several options in materials includin

  Plastic Tube Clamp   

 

 

 

 

 

 

 

Usages:

 

This model is made as per DIN3015 Part 1 and meets national heavy machinery standard.

 

This model has 8 series (fixing pipe outer diameter from 6mm~102mm),applicable to the  pipeline fixing environments of low mechanical strength.

 

It is used to fix the pipelines of medium pressure and low pressure (PN≤8Mpa)with oil, water and gas as medium in the mechanical hydraulic systems of meltallurgy, ship-making, petroleum, chemistry, oceaneering, engineering machinery and such other industries.

 

Products and materials:

Bolt:	carbon steel (4.8 grade or 8.8 grade) / stainless steel (SUS304 or SUS316)
Clamp body:	PP/PA/AL/Q235
Weld bottom    plate:	carbon steel (galvanizing or parkerising) / stainless steel (SUS304 or SUS316)

 

Working temperature :

Materials:	Temperature	Color
PP	-30°C up to +90°C	Dark green
PA	-40°C up to +120°C	Black
AL	-50°C  up to +300°C	Natural color
Q235	-80°C  up to +500°C	Galvanizing or parkerising
SUS304 or SUS316	-80°C  up to +500°C	Natural color

 

More details about the products :

 

Pictures :

 

 

Assembly information :

Assembly on welded plates   In order to determine the direction of clamps,it's recommended to mark where needs to be fixe first before assembly. Then start welding, and embed the lower half of the clamp, and set the pipes that need to be fixed.Set another half of the clamp and cover plate, and screw them with bolts.   Do not weld the base plates that have clamps installed directly.Assembly on rails   Rails can be welded on the foundation, or fixed with bolts, then push the rail nut into the ralls and turn 90°. Embed the lower half of the clamp into the nut and set the pipes that need to be fixed.Set the upper half of the clamp and cover plate ,and fix them with bolts.Multi-level assembly   Rails can be welded on the foundation,or fixed with bolts.Install the lower half of the clamp first.and set the pipe that need to be fixed. Then install the upper half of the clamp and fix it with bolts which must be prevented from moving with anti-loose cover plate. Then install the second the clamp with the method aforesaid.

 

Packing :

 

 

We also supply :

 If   you have any questions ,you can contact me.

 ***skype:rubyliao88***

Plastic Tube Clamp