1, Enhance permeability of stratum Circulate oil and increase output of oil. 2, In conformity with GB/T28001-2001 Standard;

The high –strength fracturing proppant (GZ category)

The high –strength fracturing proppant is based on large quantity of Bauxite ,mixed with small part of chemical agent and phase transfer agent ,then refined ,granulation . the specification of particles range from 0.45mm to 0.90mm ,from 0.09mm to 0.224mm,which are sintered in the high temperature .under sealed pressure ,high-strength fracturing proppant (GZ category) has characteristics of higher strength , lower breakage ,better sphericity and so on .currently ,this production is the best fracturing material for oil and gas well in reforming formation .

The specification and technical performance of GZ production

specification		70/40	40/20	20/16
Index properties
Density g/cc	Apparent density g/cc	≤3.10	≤3.10	≤3.10
	Bulk density g/cc	≤1.75	≤1.75	≤1.75
Roundness		≥0.9	≥0.9	≥0.9
Sphericity		≥0.9	≥0.9	≥0.9
Turbidity		<25	<25	<25
Anti-crushing capacity(7500psi)%		≤1	≤6	≤20
Acid solubility (12%HCL+3%HF)%		≤5	≤5	≤5
Conductivity		Medium distilled water
measuring mode		API linear flow
Auxiliary set solubility		1Ib/ft2

Product index

Small round particles of the appearanceSize 0.45-0.90mm                                          97%Sphericity                                                     ≥0.80Bulk density g/cm3                                    1.50-1.80Acid solubility %                                                 ≤5Broken rate %                                                   ≤8

Usage

Mainly used to support fractures with reforming formation in deep oil and gas wellsIncreased permeability

Oilfield used ceramic sand