Ads by Google
Super High Performance Ceramic Bearing
1)Essenitially in creased life time.
2)High stiffness because of high Young’s modulus,lower vibration.
3)Well resistance and cost effective lubrication.
4)Electrical insulation and non-magnetism.
5)High temperature resistance up to 1000
6)High corrosion
Silicon nitride ceramic bearings:
1.the rings and balls are all silicon nitride ceramics with cages made by Nylon,PTFE,PEEK ect.
2.Low density
Due to the low density, ceramic bearings have low centrifugal load, and create little heat so they can work in the conditions of higher speed.
3.Suitable elastic ratio
The elastic ratio of ceramics is higher than that of steel, this can increase bearing’s dynamic stiffness, however, the elastic ratio should not be too high, otherwise, excessive elastic ratio will create stress concentration to decrease the bearing capacity.
4.Low thermal expansion
This can make bearings insensitive to the changes of temperature, and is helpful to preventing the bearings from being jammed. According to hybrid bearings, the applicable rotation speed interval can be wider.
5.High strength
High compressing strength is the requirement of bearing high contact stress (for ceramics, the compression strength are usually determined by the rupture modulus measured by three-point or four-point bending strength ) High hardness and high toughness
Ceramics have high hardness and high toughness can achieve good surface smoothness, and can prevent the damage of impact and other outer particles.
6.Good rolling fatigue performances
This performance is an absolutely necessary for bearings.
7.Flaking failure pattern
If the rolling element fails in the working, it should be fatigue flaking, this pattern has sign before bearings being jammed, and is the least harmful failure pattern.
The ceramic bearings working in extreme conditions have some appended performances
8.Resistance to elevated temperatures and stability
Ceramic bearings can keep their mechanical stability up to 800°C.
9.Corrosion resistance
In the conditions of oxidation and corrosion, especially the contact zone where the oil film have been pushed off due to the repeat rotation, the material should have good oxidation and corrosion resistance.
Now we can produce two kinds of ceramic bearings: ZrO2 ceramic bearings and Si3N4 ceramic bearings.
In the ceramic bearings produce deep ditch ball bearings are the main products, gauge 6000-6008 and 6200-6208, class P0 and P6.
Our Bearings are exported to the USA,Canada,UK,Germany,Poland,Italy,Russia,the Middle East,Africa and other countries and regions of the world.Changzhou Giant Bearing Co. Ltd. is committed to the introduction of high-quality bearing products.our company have more than 200 employees.Our brands include SKF bearings, NSK bearings, FAG bearings, TIMKEN bearings, KOYO bearings, NTN bearings, INA bearings, IKO bearings and so forth.