crushing equipment in cement industry 1.used for primary crushing 2. stable structure 3.ISO9001,CCC 4.OEM is available

crushing equipment in cement industry

 

Working Principle:

The motor transmits through belt, drives the moving jaw up and down by eccentric shaft, when the moving jaw plate rises, the angle between the fixed jaw plate and the moving jaw plate gets larger, and the materials can be crushed to reach the crushing target. When then moving jaw plate is down, the angel between the moving jaw plate and fixed jaw plate becomes smaller. The movable jaw plate leaves the fixed jaw plate under the affection of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.

Characteristics: High crushing ratio, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost. And so on.

Technical Data of Sledger:

Model	Max Feeding  Size (mm)	Discharge Size (mm)	Capacity (t/h)	Motor Power (kW)	Overall Dimensions (mm)	Weight (t)
PE150×250	125	10-40	1-5	5.5	896×758×850	0.8
PE250×400	200	20-60	5-20	15	1450×1315×12496	2.8
PE400×600	350	40-100	15-60	30	1565×1732×1586	6.5
PE500×750	425	50-100	50-100	55	1890×1918×1870	10.1
PE600×900	480	65-160	60-130	75	2305×1840×2298	16.5
PE750×1060	630	80-140	80-180	110	2450×2472×2840	29
PE900×1200	750	95-165	140-260	110	3335×3182×3025	54.5
PE1000×1200	850	195-265	315-550	110	3435×3182×3025	57
PE1200×1500	1000	150-300	400-800	160	4200×3732×3843	100.9
PEX250×750	210	25-60	10-40	22	1667×1545×1020	5
PEX250×1000	210	25-60	15-50	30	1550×19964×1380	6.5
PEX250×1200	210	25-60	20-60	37	2192×1900×1950	7.7

Pictures: