Professiional industrial camera VGA output apply to Hospitals, schools and scientific research departments OEM accept

Professiional  industrial camera VGA output apply to Hospitals, schools and scientific research departments

 OEM accept

Specifications:

type	DVSP778
Image sensor	1300000 pixel, Color cmos,effective pixels1280(H)*1024(V)
Definition	Over 600 lines
Image refresh rate	25 fb/s
SNR	>60dB
Video port	Standard VGA port
VGA output	1024X768 60Hz(default),1024X768 75Hz,1280X1024 60Hz
Lens mount	CS
Control function	Brightness and color balance,saturation,sharp degrees,Cb(blue)offset,Cr(red) offset,cursor,vertical,horizontal,negative
Power supply	5V DC Allow 10% deviation
Working current	400mA
Power	2W
Size	50*50*90(mm)

Surveying operation:.Setting:       Under system menu ¡°cross cursor¡±to choice then can be disply;cross line colour,double cross line color. moving line color:can optional any moving line color;calibration length:a basis of surveying distance,if calibration more longer and precision more high

2.Calibration:  Put the calibrator under camera,first calibration X axle£» press CAL button until 3 munites ,on screen can be display:standard type DX,length=**mm;through SEL,,button to adjust the paralla line between distance equal to calibration length,and press CAL button,on the left screen can show the calibration OK,then into Y axle calibration£¬same with calibration X ,little different is when you press on CAL button then off,should be continuous 5 times.

3.Surveying:  Put the surveying under camera,keeping enlargement factor,then adjust the lens,then through  SEL  button to move the 2 parallel lines survey distance.Attention:under surveying don't change the enlargement factor,if changed,should be take a calibration again

 Applications:

*      Electrical and mechanical surface area to Enlarge imaging.

*   PCB IC assembly and the quality inspection.

*   Experiment, examine and analyse in  Hospitals, schools and scientific research departments.

*      Printing detect and  Jewels identify.