Ads by Google
high focus cctv camera
A . HD-SDI parameters
Image Sensor | 1/2.8”SONY CMOS IMX103 | 1/2.8”SONY CMOS IMX136 | 1/2.8”SONY CMOS IMX138 |
Lens | Optional (Lens with IRIS and CS interface more than 2.0Mpega) | ||
Pixel | 3.14 Megapixel 2048(H)×1536(V) | 2.38 Megapixel 2048(H)×1162(V) | 1.37 Megapixe1280(H)×720(V) |
Video format | 1080P50/60;1080P25/30;1080I50/60;720P25/30;720P50/60 | 720P25/30;720P50/60 | |
Day/Night mode | Support Color to B/W, Auto IR filter change | ||
Min. Illumination | 0.5Lux/F1.2 | 0.2Lux/F1.2 | 0.1Lux/F1.2 |
AGC | Auto, from High/Mid/Low | ||
White Balance | PUSH(Defaut)/AUTO | ||
WDR | 80db | 100db | 120db |
S/N Ratio | >60dB(AGC OFF) | >65dB(AGC OFF) | >68dB(AGC OFF) |
B/L compensation | Auto | Intelligent | Intelligent |
DNR | Auto | ||
Mirror | Horizontal/ Vertical | ||
Electric Shutter | 1/25~1/12000s,Keypad(1/25~1/400) | ||
Built-in Sync. | Built-In Sync. | ||
Display information | Full English OSD menu | ||
Video output | 1 Channel SDI interface | ||
RS485 interface | Set image parameter, support PELCO-D, Baud rate 9600 | ||
Protocal | PELCO-D | ||
Waterproof level | IP66 | ||
Power Supply | AC/DC=10-24V | ||
Power | <2.5W | ||
Working temperature | -20°C ~ +60°C | ||
Weight | 620g | ||
B. HD-SDI camera System network topology
HD-SDI camera is applied to monitoring system usually adopts the following 4 way:
A. Be connected directly to high-definition monitor with SDI input through cable.
B. SDI signal will be connected to the converter (SDI turn HDMI), HDMI output format signal to HD displayer;
C. SDI signal will be connected to the SDI DVR, then HDMI output format signal to HD displayer;
D, SDI signal will be connected to the SDI encoder, through the network transmission to SDI decoder revert to SDI signal output to DVR and finally to display
C. Dimension picture: