Shenzhen Meitaibang Chemical is professional in mobile phone sticker.It is our new peoduct,adopting new synthetic rubber with the character of environmental protection ,energey conservation,low carbon and so on .This sythetic glue can use repeatly without any trance left.If the adhesion of the glue affected for the dust on the sticky surface when you use ,you can wash it with clear water ,then dry it and the adhesion will come back and you can repeat as much as possible .

It is a product with two sides ,one is PET coating with adhesive,another one is our washable two sides adhesive product.The glue we produce is without any adhesion when you touch .It can bear the biggest hung power when sticking on the surface of flat ceramics,glass,paint wall,wood board and so on .

Thickness:0.25mm and 0.7mm at present

Color:Transparent and White(can print the color and picture as your designs)

Thickness:0.5mm and 0.7mm at present

Temperature Range: -50°C-- 80°C

Application

Applied in Mobile phones, tablet computer, etc. Various kinds of leather removable two-side sticker is suitable for mobile phones, tablet computer, etc,which is one side is fixed another side is removable , can make smooth material surface fixed sticker for high-grade mobile phones, tablet computer, the computer mouse pads cover purse.

3.Installation Method

(1)Keep the surface of the things being sticked clean with clean cloth or paper.

(2)Tear off the rubber film on the bottom.

(3)Press tightly when sticking.

Removing Method

(1)Open a dime of the rubber strip gently,then tear it off smoothly.

Attention:

1.Wash and clean it if there is water,oil,wax or somethigs dirty affected the adhesion on the object stickedsurface.

2.Keep away from high temperature.

3.Do not hung the things fragile eassily and dangerous.

4.If reduce the adhesion result from dust ,wash and dry then use again.

5.Do not use over weight.

4S Phone Case Sticker