Ads by Google
| NO. | Bulldozer FL410Y-1 (50 Ton) | SPECIFICATON | |
| 1 | Main specification | ||
| -1 | Operating weight without ripper | 49000kg | |
| -2 | Dimension without ripper | 7100mm×4314mm×3928mm | |
| -3 | Ground pressure | 0.109Pa | |
| -4 | Ground ability | 30° | |
| -5 | Min. turning radius | 4200mm | |
| -6 | Min. ground clearance | 600mm | |
| -7 | Max. tractiveforce | 450kN | |
| -8 | Max. forward speed | 12.2km/h | |
| -9 | Max. reverse speed | 14.8km/h | |
| -10 | Blade capacity | 14.6m 3 | |
| -11 | Blade Max. lift above the ground | 1620mm | |
| -12 | Blade Max. drop below the ground | 749mm | |
| 2 | Engine | ||
| -1 | Model | KTA19-C525 | |
| -2 | Type | Straight vertical, four-stroke, water cooling, direct injection type. turbocharger. | |
| -3 | Start method | Electric motor | |
| -4 | Number of cylinder-bore*stroke | 6-159-159 | |
| -5 | Displacement | 18.9L | |
| -6 | Rated revolution | 2000r/min | |
| -8 | Rated horsepower | 306kw | |
| -9 | Max. torque | 1920 N.m | |
| -10 | Max. torque/revolution | 1400 rpm | |
| -11 | Min. fuel consumption | 210g/kw.h | |
| -13 | Lubrication type | Forced lubrication | |
| -14 | Cooling type | Water circulation | |
| -15 | Fan type | Blowing cooling | |
| -16 | Air filer type | 2 stage | |
| -17 | Start motor | 9kW/24V | |
| -18 | Electric generator | 50A/24V | |
| -19 | Battery | Made in china | |
| 3 | Transmission system | ||
| -1 | Hydraulic torque converter | 3-element, single stage, single phase | |
| -2 | Cooling type | Water cooling | |
| -3 | Transmission | Planetary | |
| -4 | Bevel gear | One bevel gear reduction | |
| -5 | Forward:1 st | 0-3.4km/h | |
| -6 | Forward:2 nd | 0-6.7km/h | |
| -7 | Forward:3 rd | 0-12.2km/h | |
| -8 | Reverse:1 st | 0-4.2km/h | |
| -9 | Reverse:2 nd | 0-8.0km/h | |
| -10 | Reverse:3 rd | 0-14.8km/h | |
| 4 | Steering system | ||
| -1 | Steering clutch | Wet, multiple disc, spring loaded, hand-operated with booster and hydraulic released. | |
| -2 | Steering brake | Wet, band brake, operated with hydraulic booster. | |
| -3 | Final drive | Planetary gear | |
| 5 | Travelling system | ||
| -1 | Type | K type suspension | |
| -2 | Tooth depth | 88mm | |
| -3 | Number of track shoes | 40 pics each side | |
| -4 | Track width | 610mm | |
| -5 | Length of track on ground | 3425mm | |
| -6 | Track pitch | 2260mm | |
| -7 | Number of track rollers (each side) | 2 each saide | |
| -8 | Number of carrier rollers (each side) | 7 each side | |
| -9 | Ground clearance | 600mm | |
| 6 | Hydraulic system of work equipment | ||
| -1 | Rated pressure | 20MPa | |
| -2 | Hydraulic pump type | Double gear pump | |
| -3 | Dis[lacement | 160ml/r | |
| -4 | Valve type | Pilot valve | |
| -5 | Working oil tank | 250L | |
| 7 | Working equipment | ||
| -1 | Blade type | Semi-U blade | |
| -2 | Blade weight | 6750kg | |
| -3 | Dimension | 4314mm*1875mm | |
| -4 | Ripper type | Single shank | |
| -5 | Ripper weight | 5152 kg | |
| -6 | Ripper quantity | 1 | |
| -7 | Ripper digging angle | 45° | |
| -8 | Digging depth | 723 | |
| -9 | Ripper max digging depth | 1350mm | |
| -10 | Ripper max. lift depth | 1180mm | |
FL410Y-1 50 Ton Bulldozer