Ads by Google
1.First,dose and match measured raw materials 2. After distributing,feed raw material into pouring mixer to make slurry 3. Through thoroughly mixing,the slurry is poured to mould 4. After pre-curing under a certain temperture and time,the block would reach a certain hardness prepare for cutting 5. Tilting hoister would turn over 90 degree of mould 6. Then open the mould and separate it from block,and take the block woth side plate ti cutting cart 7. The blocks then be cut through the cutter firstly of two vertical sides of block 8. Secondly the horizontal cutting 9. Finally the vertical cutting 10. After cutting,the block is hanged to trolly with side plate by semi-finished product hoister 11. Organizing the cut blocks and put them into autoclave 12. Hardending the blocks under certain temperture and pressure 13. Take finished products out of autoclave 14. The finished product hoister take the finished product to stock shield 15. Packed for loading 16. The side plate return back by side plate roller 17. Side plate would be organized with open mould 18. Clean the mould and preparing for next pouring 19. Steel bars processing line for slab production
Autoclaved Aerated Concrete Plant