steel,zinc,stainess steel with any plated or anti rusty finish Drive nail zamac anchor at reliable quality

A : use with the following base materials:

Concrete

Brick

Block

B : features of products

•Hole size = anchor diameter .•Tamper resistant .•Corrosion resistant, zinc alloy anchors .•To determine length of anchor needed, add the thickness of material to be fastened to the minimum embedment.

C : how to use

Installation Instructions

Metal hit concrete anchorscan be installed in four simple steps. It is important to note during installation that hole size is equal to anchor diameter. These fasteners can be installed in a number of base materials including concrete, brick, and block. A metal hit anchor performs best when used in light-duty dead loads but are not recommended for use in overhead applications. These specific types of concrete anchors are tamper and corrosion resistant. Step by Step Installation Instructions follow:

1.Drill hole using carbide tipped bit. Drill hole 1/4 ” deeper than expected embedment depth.

2.Clean hole of debris.

3.Insert metal hit anchor through fixture in to hole in base material.

4. Using a hammer hit the nail into anchor until head is flush with top of anchor

 

Metal hit anchor technical informationneeds to be considered before installation. This type of concrete anchor is corrosion resistant and made from zinc alloy. Metal Hit Anchors are available in two diameters - 3/16" and 1/4". To determine the length of metal hit anchors needed, simply add the thickness of the material to be fastened to the minimum embedment. Most metal hit anchors can withstand concrete shear levels up to 884.

A:INCH

METAL HIT ANCHOR Ultimate Holding Values - CONCRETE*

				3000 PSI Concrete
Part No.	Anchor Diameter (inches)	Anchor Length (inches)	Drill Bit Diameter (inches)	Minimum Embedment (inches)	Tension (lbs.)	Shear (lbs.)
SY31678	3/16	7/8	3/16	5/8	283	793
SY1434	1/4	3/4	1/4	1/2	261	884
SY141	1/4	1	1/4	3/4	261	884
SY14114	1/4	1-1/4	1/4	7/8	261	884
SY14112	1/4	1-1/2	1/4	1	261	884
SY142	1/4	2	1/4	1	261	884
SY14212	1/4	2-1/2	1/4	1-1/4	261	884
SY143	1/4	3	1/4	1-1/4	261	884

B : MM

Max.Fixture	Anchor Thickness(mm)	Weight Kgs/1000pcs	Qty.Per Box/Ctn	Pull out Load(Kgs)
M5X20	6.3mm	4.6	100/5000	230
M6X30	12mm	9.8	100/2000	350
M6X40	22mm	11.3	100/2000	410
M6X50	32mm	14.5	100/1500	500
M6X65	45mm	17	100/1000	600

Workroom show:

Raw Materialwarehouse show:

( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v0/764794284_1/Nail_pin_anchor_bolt.jpg' , 'http://i00.i.aliimg.com/photo/v0/764794284_2/Nail_pin_anchor_bolt.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Nail pin anchor bolt