1:Specification:18650 2:Nominal Voltage: 3.7V 3:Capcity: 2000mAh sanyo red High power rechargeable battery

Key Specifications/Special Features:

Cobalt acid lithium as anode materialsVoltage: 3.2VPlatform capacity: over 90%Long cycle lifeCycling capacity: above 80%Over 1,000 cycles at 10 C5AOver 500 cycles at high rate discharge of 10 C5AGood charge and discharge performance at high temperature, discharge capacity at +55 °C can be over 90% of that at room temperatureCharging voltage: 3.7VDischarge voltage: 2.0VProtective voltage: 2.5VCycle time: 1500 cyclesApplication:All trademarks shown here are for reference purposes only. They are the property of their respective owners, and we are not authorized to sell items bearing such trademarks

Rated Capacity	2600mAh (0.5CA   Discharge)
Rated Voltage	3.7V
Internal Resistance	≤45mΩ  (with PTC)
Cut-off  Discharge Voltage	2.75V
Charge Upper Limit Voltage	4.20±0.05V
Standard Charging Circuit	0.2C A
Charging Circuit	0.5C A
Standard Discharging Circuit	0.2C A
Fast Discharging Current	0.5C A
Max Discharging Current	1C A
Weight	about 50g
Height	65mm
Operational Temperature	charge (0 ~ 45°C)   discharge  (-20 ~ 60°C)
Storage Temperature	within a month  (-5 ~ 35°C) within six months  (0 ~ 35°C)

Features and Benefits

1.Lithium Ion 18650 cylindrical rechargeable batteries. 2.Flat top terminal. 3.Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V. 4.Higher energy density and lower weight than other types rechargeable batteries.5.Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time. 6.Suitable for Cameras,GPS Receivers,PDA,Clocks,Remote Controls,Safety Devices,High Drain Devices,Cordless Phone Tools,Lighting or other device needing 3.7V power.Building portable power device needing high energy density and low weight.

Other

1, OEM orders are welcome

2, Superior quality and cost-performance ratio

3, Tags, plugs and connectors are available.

4, We could design and develop Li-ion battery per customer's product working performance & structural appearance.