Ads by Google
Feature
1.Built-in automatic protection for cell over/under voltage, pack over/under voltage, charge/discharge over-current, short circuit, and over temperature.
2.Support pre-charging and zero-volt charging with separate MOSFET control.
3.No battery management system required.
4.PowerPump cell-balancing. PowerPump technology transfers charge between cells to balance their voltage and capacity. Balancing is possible during all battery modes: charge, discharge, and rest. Highly efficient charge-transfer circuitry nearly eliminates energy loss while providing true real-time balance between cells, resulting in longer run-time and improved cycle life.
5.Maintenance free
6.Optional SMBus communication interface to monitor cell voltage, current, temperature, SOC, etc.
electric scooter battery
Item | 48V60AH | |
| Configuration | 4S1P12V60Ah | |
Voltage | 59.2V | |
Nominal Capacity (C/5, 23°C) | 60 Ah | |
Weight (approximate) | 28kg | |
Dimension incl. Terminals(LxWxH) | 197x131x183mm for a module | |
Terminals, Female-Threaded | M6*10 | |
Specific Energy | 129Wh/kg | |
Operating temperature | -10°C to +50°C | |
Storage temperature | -40°C to +50°C | |
Operating humidity | 5% to 95%, non-condensing | |
Water/dust resistance | IP56 | |
Standard Discharge@ 23°C | Max. Cont. Current | 30A |
Max. 30 sec. Pulse | 80A | |
Cut-off Voltage | 11V | |
Run-time @ 10A | 240 min | |
Run-time @ 30A | 80 min | |
Standard Charge | Charge Voltage | 67.2V |
Float Voltage | 67V | |
Recommended | 30A | |