Ads by Google
Model | HPS-400W-D |
| Lighting Source Type | HPS 400W |
| Input Voltage | 220V |
| Input voltage frequency | 50/60Hz |
| Input current | 1.93A |
| Power factor | ≥0.95 |
| Input power | 425W |
| Start current | 0.5A |
| Instant voltage sag | 30% |
| Range of operating voltage | 220V±15% |
| Total harmonic distortion | <10% |
| Operating Temperature | -20°C~+50°C |
| power efficiency | 0.94 |
| Dimension(L×W×H)mm | 220×111×68 |
| Net weight | 1.26kg |
| Dimming | Prset, PMW, R485, TTL |
| Warranty | two years |
| Technical Description | ||
| .Professional patented control software , simple circuit and stable performance | ||
| ·Wide range of operation voltage, suitable for large voltage fluctuation circumstances | ||
| ·A little current to start, expansion of lamps life and reduction of original installation charge | ||
| ·Low voltage to start, suitable for low voltage circumstances | ||
| ·High efficiency >94%,remarkable effect of saving energy | ||
| ·High power factor, able to reduce initial installation cost | ||
| ·Able to insure the invariableness of out power even if input power fluctuates | ||
| ·Long line driven (The ballast can be installed far from lamp and is easy to maintain.) | ||
| ·High quality of illumination, no frequent flash | ||
| ·Low total harmonic distortion, little impact on power network | ||
| ·Full protection: protection for open loop, short loop and hot lamp restart | ||
| ·Low temperature rise, applicable to wind range of environmental temperature | ||
| ·Light body | ||
| ·Easy installation, without out-side starter, no compensation capacitor | ||
| Certificates and Standards | |
| *CE No.:08120164 | |
| *Rohs | |
| * Harmonic distortion EN 61000-3-2 | |
| * EMC EN 61547/ EN 55015/ EN 55022B | |
| * Safety EN 60926/ EN 60928 / VDE 0712/14, 22 | |
| * Performance EN 60927/EN 60929 | |
| * Libration and impact IEC 68-2-6-FC/IEC 68-229-Eb | |
| * Quality standard ISO 9001 | |
| * Environmental standard ISO 14001 | |
| * Authentication of China energy saving products | |