150W MH&HPS digital electronic ballast/road lighting ballast
<
Model | HPS-150W-D |
Lighting Source Type | 150W |
Input Voltage | 220V |
Input voltage frequency | 50/60Hz |
Input current | 0.68A |
Power factor | ≥0.95 |
Input power | 160W |
Start current | 0.30A |
Instant voltage sag | 30% |
Range of operating voltage | 220V±15% |
Total harmonic distortion | <20% |
Operating Temperature | -20°C~+50°C |
power efficiency | 0.93 |
Dimension(L×W×H)mm | 182×94×48 |
Net weight | 0.70kg |
Dimming | PWM/0-10V/RS232/RS485/TTL/Dimmer |
Warranty | two years |
.Professional patented control software , simple circuit and stable performance |
·Wide range of operation voltage, suitable for large voltage fluctuation circumstances |
·A little current to start, expansion of lamps life and reduction of original installation charge |
·Low voltage to start, suitable for low voltage circumstances |
·High efficiency >94%,remarkable effect of saving energy |
·High power factor, able to reduce initial installation cost |
·Able to insure the invariableness of out power even if input power fluctuates |
·Long line driven (The ballast can be installed far from lamp and is easy to maintain.) |
·High quality of illumination, no frequent flash |
·Low total harmonic distortion, little impact on power network |
·Full protection: protection for open loop, short loop and hot lamp restart |
·Low temperature rise, applicable to wind range of environmental temperature |
·Light body |
·Easy installation, without out-side starter, no compensation capacitor |
Testing Report